Safety Instructions

7. Attach the clevis to the rudder and elevator
control surfaces. Use the outer holes of the
arms. Slide the clevis retainers up to secure the
clevis.
8. Insert the two carbon wing joiners into the
wing and slide the two wing halves together.
9. Install the wing center cover by lining up the
posts on the bottom of the cover with the
holes in the wing.
10. Connect the aileron servos to the Y-harness
coming from the receiver.
11. Place the wing in place making sure you are
not pinching the servo wires.
12. Secure the wing in place using the 4 rubber
bands. Install them in a X pattern.
a. If flying in high winds or want to fly
aerobatics, we recommend using 6
rubber bands to secure the wing.