Installation Instructions

Wireless Charger Mat
HKWP1661-10E
Manufacture: HANK ELECTRONICS CO.,LTD.
Address: Floor 2nd-7th, A8, Hongye Industry City, Zhou shi Road ,
Baoan District ,shenzhen China
LED
26.6mm
76.5mm
37.2mm
Product Parameter
Input
Output
N.W
Product Size

1. Don't use & store this charger under humid environment.
2.
Working tempreture: within 0
~ +25
.
3. Keep it away from children.
4. Avoid thunder strike.

DC 12V-24V
Output 1: 5V/2.4A
Output 2(QC 3.0): 5V/3A, 9V/2A, 12V/1.5A
27g
26.6*37.2*82.1mm
82.1mm
Product Parameter



N.W

Product Size
Accessories





Full Charge

Power on for 3 seconds, then off

White led on

White led on
1. Charge: Connect the Wireless charger into car socket
with cable.

1. LED Indicator: White
2. Lay the device on the wireless charger for charging.
· Do not expose the charger to sources of excessive heat, such






It is recommended that the following accessories should
be used: REV:01





power) are not accessible to the user, and cannot be
changed by the user.
EU regulatory conformance

110-205 






38.08 dBuA/m at 3m.
DECLARATION CONFORMITY
Hereby, HANK Electronics Co., Ltd. declares that the


at the following internet address

Manufacturer: HANK Electronics Co., Ltd.
Manufacturer's Address: Floor 2nd-7th, A8, Hongye Industry
City, Lezhujiao, Zhoushi Road, Baoan District, Shenzhen,China.
The Product shall be powered by external power supply or
other 5V DC source, which shall comply with LPS

This product can be powered through a micro USB from any
CE compliant power source that implement the European


Fire and Electric Shock Hazard

rain. Do not use the charger near a bathtub, sink, sauna,
pool, or steam room, Exposing of the charger to moisture
could result in electric shock.
· Do not drop, disassemble, open, crush, bend, deform,
puncture, shred, microwave, incinerate, paint or insert

electric shock.
· Clean the charger only with a dry cloth.
· Do not expose the charger wot extreamly high or low
tempretures.
DC 5V/2A, 9V/1.67A
10W Max
300g
110-205KHz
188.5*103.5*24.9mm
Car charger, cable


2. Don't disassemble this charger privately.
3. Handle with care and avoid falling on the ground.
4. Don't place heavy objects on it.
5. Children should be supervised to use these products.
6.
Charger working temperature : 0℃~25.



7. Don't place metal foreign material between mobile phone
and this charger.
103.5mm
24.9mm
188.5mm
Car cigarette lighter DC12-24V
Car Charger
HKDP0019-30Q
3.
the wireless mat Put it on the front of the car or on
the central console.



the following internet address: 
Importer: XXX
Address : XXX
FCC NOTICE(for USA)


(1) This device may not cause harmful interference
(2) This device must accept any interference received.
including interference that may cause undesired

The manufacturer is not responsilble for any radio or tv




the limits for a class B digital device. pursuant to part 15 of
the FCC Rules. These limits are designed to provided









encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.

receiver.

from that to which the receiver is connected.
- Consult the dealer or an experienced technician for help.





Summary of content (1 pages)