Installation Instructions
Wireless Charger Holder
HKWP1671-10E
Manufacture: HANK ELECTRONICS CO.,LTD.
Address: Floor 2nd-7th, A8, Hongye Industry City, Zhou shi Road ,
Baoan District ,shenzhen China
LED
Product Parameter
N.W
Product Size
Accessories
Status
Full Charge
White led on
White led on
1. Charge: Connect the Wireless charger into socket with cable.
1. LED Indicator: White
2. Lay the device on the wireless charger for charging.
DC 5V/2A, 9V/1.7A, 12V/1.25A
10W Max
xxx
110-205KHz
137.1*155.5*131.1mm
Car charger, cable
2. Don't disassemble this charger privately.
3. Handle with care and avoid falling on the ground.
4. Don't place heavy objects on it.
5. Children should be supervised to use it.
6.
Charger working temperature : 0℃～25℃.
7. Don't place metal foreign material between mobile phone
and this charger.
137.1mm
137.1mm
131.1mm
155.5mm
26.6mm
76.5mm
37.2mm
Product Parameter
Input
Output
N.W
Product Size
1. Don't use & store this charger under humid environment.
2.
Working tempreture: within 0℃ ~ +25℃.
3. Keep it away from children.
4. Avoid thunder strike.
DC 12V-24V
Output 1: 5V/2.4A
Output 2(QC 3.0): 5V/3A, 9V/2A, 12V/1.5A
xxx
26.6*37.2*82.1mm
82.1mm
· Do not expose the charger to sources of excessive heat, such
It is recommended that the following accessories should be
used:
XXXX
power) are not accessible to the user, and cannot be
changed by the user.
EU regulatory conformance
XXXXXXXXXX
-XXXX dBuA/m at 10m.
DECLARATION CONFORMITY
Hereby, HANK Electronics Co., Ltd. declares that the
at the following internet address
Manufacturer: HANK Electronics Co., Ltd.
Manufacturer's Address: Floor 2nd-7th, A8, Hongye Industry
City, Lezhujiao, Zhoushi Road, Baoan District, Shenzhen,China.
FCC NOTICE(for USA)
(1) This device may not cause harmful interference
(2) This device must accept any interference received.
including interference that may cause undesired
The manufacturer is not responsilble for any radio or tv
the limits for a class B digital device. pursuant to part 15 of
the FCC Rules. These limits are designed to provided
encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
receiver.
from that to which the receiver is connected.
- Consult the dealer or an experienced technician for help.
The Product shall be powered by external power supply or
other 5V DC source, which shall comply with LPS
This product can be powered through a micro USB from any
CE compliant power source that implement the European
Fire and Electric Shock Hazard
rain. Do not use the charger near a bathtub, sink, sauna,
pool, or steam room, Exposing of the charger to moisture
could result in electric shock.
· Do not drop, disassemble, open, crush, bend, deform,
puncture, shred, microwave, incinerate, paint or insert
electric shock.
· Clean the charger only with a dry cloth.
· Do not expose the charger wot extreamly high or low
tempretures.
the following internet address:
Importer: XXX
Address : XXX