User's Manual

 Low battery alert

 Work as a trigger to activate the other smart devices

 OTA Supported.

3. PRODUCT STRUCTURE

Button Activities and LED indicator

In the network

1.Long press the button for 5 seconds, Blue LED blinking, the device enter

configuration mode. Network access successful, the LED light turns off;

Times out LED goes out.

2.Press the button, LED turns on, release it, LED turns off.

Out of the

network

1. Long press the button for 5 seconds, the device will be removed from

the network. After removed, the device will enter the network

configuration mode (LED flash for 30 seconds).

2. Press the button, LED turns on, release it, LED turns off, sampling and

send data.

Note：

1. In the network: The device is set by default and has not been added to the Zigbee Gateway.

2. Out of the network: The device has been added to the Zigbee gateway and is included in the

network.

3. The configuration time lasts for 30 seconds. Times out, shall be re-operated.

PRODUCT SPECIFICATIONS

Power Supply:

1xCR2032 Battery （2.4V -3.3V DC）

Working current:

≤6mA (

average

)

LED Indicator

Power button

Air Vent