User Guide

14
ACCESSORIES
C124-0 Calibration solution, 0 EBC, 30 mL bottle
C124-1 Calibration solution, 2.5 EBC, 30 mL bottle
C124-2 Calibration solution, 125 EBC, 30 mL bottle
C124-03 EBC Haze calibration set (C124-0, C124-1, C124-2)
HI 731318 Tissue for wiping cuvettes (4 pcs)
HI731321 Spare measurement cuvettes (4 pcs)
HI 92000 Windows
®
compatible application software
HI 920011 5 to 9-pin RS232 connection cable
HI93703-50 Cleaning solution, 230 mL bottle
BATTERY REPLACEMENT
In order to minimize the battery consumption, the meter is equipped with an auto-
shut off function which switches the meter off after 5 minutes of non-use.
The meter is powered by 4 alkaline batteries (1.5V AA), which are constantly
monitored by the meter to ensure reliable readings.
A "LO BAT" indication will appear on the display
when the batteries become weak and require
replacement; the instrument can perform only 50
more measurements.
A "0% LO BAT" message will appear on the display
when the batteries level is too low for performing
measurements; the message appears for a few
seconds, then the meter automatically shuts off;
immediately replace the batteries.
Battery replacement must only take place in a non hazardous area using 4 alkaline
batteries, 1.5V AA size.
Turn the meter off, unscrew the 2 screws on the back of the instrument and remove
the battery cover. Substitute the rundown batteries with new ones, while paying
attention to their polarity. Reattach the battery cover and tighten the 2 screws.