User Guide

VIEWING LOGGED DATA

• Press ALT+VIEW keys: the last sample will be displayed.

• Press the “right arrow” key to scroll among turbidity value, date and time of

the sample.

• Press the “up/down arrow” keys to view next sample and use the “right arrow”

to scroll the date and time.

• Press ALT+VIEW again to exit and return to measurement mode.

VIEWING AND SETTING DATE AND TIME

VIEWING:

• Press ALT+DATE to toggle between date and time.

SETTING:

• Press and hold ALT+DATE for 3-4 seconds.

• Press the “up/down arrow” keys to set the year.

• Press the “right arrow” to scroll to month & day, then use the “up/down arrow”

keys to set the date.

• Press the “right arrow” again to scroll to time, then use the “up/down arrow”

keys to set the time.

• Press the “right arrow” again to save and exit from setup mode.

Note: Press ALT+DATE to exit without saving.

To communicate with the instrument through the HI92000 software, simply connect

the 9-pin serial port of the PC to the 5-pin connector of the meter, by using the

HI920011 cable (optional).

The meter will maintain its full functionality, being also able to perform data transfer

while operating.

Notes:

• RS232 communication is not allowed during calibration.

• The auto-off feature is disabled when the meter is connected to a PC.

RS232 CONNECTION