Owner manual

NSTRUMENT IDNSTRUMENT ID

NSTRUMENT ID

Press the CAL key when “InId” is displayed. The instrument ID (“0000”

to “9999”) will begin blinking.

Press the ARROW

keys to change the instrument ID value.

Press the CFM key to save the modified instrument ID value or press the

CAL key to cancel without saving the instrument ID.

Note: The instrument ID is downloaded to a PC as part of a logged data

set to identify it’s origin.

TEMPERATURE UNITTEMPERATURE UNIT

TEMPERATURE UNIT

Press CAL when “tenP” is displayed. The temperature unit will start

blinking.

Press the ARROW keys to change the option.

Press CFM to save the modified temperature unit.

Press CAL to escape without saving.