Thermometer User Manual

PC INTERFACEPC INTERFACE

PC INTERFACE

Data transmission from the instrument to the PC can be done with the HI 92000 Windows

compatible

software (optional). HI 92000 also offers graphing and on-line help feature.

Data can be exported to the most popular spreadsheet programs for further analysis.

HI 4221 and HI 4222 instruments have two available serial interfaces: RS232 and USB. The desired serial

interface can be selected from the settings window of the HI 92000 software.

If choosing the RS232 serial interface, use the optional Hanna HI 920010 cable connector to connect your

instrument to a PC. Make sure that your instrument is switched off and then plug one connector to the

instrument RS232 socket and the other one to the serial port of your PC.

Note: Other cables than HI 920010 may use a different configuration. In this case, communication between

instrument and PC may not be possible.

If choosing the USB serial interface, use a standard USB cable to connect your instrument to the PC.

For both serial interfaces, make sure that the instrument and the HI 92000 software have the same baud rate

and the appropriate communication port.

To delete lots:

• Press

while in

Log Recall

mode.

• Press

or to access delete or delete all mode.

Otherwise, press

to return to

Log Recall

view mode.

• After selecting one of the deleting modes, use or

to select one lot and then press or

to delete the selected lot or all lots. The “Please wait...”

message will be displayed on the LCD until the selected lot or

all lots are deleted.

• Press

and then press to exit deleting mode

and return to

Log Recall

view mode.

• Press

to exit

Log Recall

mode and return to

Measure

mode.

Note: Logged lots should also be deleted whenever “Please Delete Old Log Files” or “Low Data Logging Space”

message appears on the LCD, in the Reminder messages area.