User Guide

Recommendations for Users

Before using these products, make sure that they are entirely suitable for the environment in which they are used.

Operation of these instruments in residential areas could cause unacceptable interference to radio and TV equipment,

requiring the operator to take all necessary steps to correct interferences.

Any variation introduced by the user to the supplied equipment may degrade the instruments' EMC performance.

To avoid electrical shock, do not use these instruments when voltages at the measurement surface exceed 24VAC or 60VDC.

To avoid damage or burns, do not perform any measurement in microwave ovens.

In particular cases the meters could turn off. In these cases they can be turned on by pressing the ON/OFF key.

DECLARATION OF CONFORMITY

Hanna Instruments Srl

V.le delle industrie 12

35010 Ronchi di Villafranca (PD)

ITALY

herewith certify that the thermometers

have been tested and found to be in compliance with the following regulations:

IEC 801-2 Electrostatic Discharge

IEC 801-3 RF Radiated

EN 55022 Radiated, Class B

Date of Issue: 30-11-1995

D.Volpato - Engineering Manager

On behalf of

Hanna Instruments S.r.l.

HI 9040 HI 9041 HI 9050 HI 9051

CE DECLARATION OF CONFORMITYCE DECLARATION OF CONFORMITY

CE DECLARATION OF CONFORMITY

Untitled-5

http://www.hannainst.com

HANNA LITERATUREHANNA LITERATURE

HANNA LITERATURE

LAB RECORDING WATER ANALYSIS HANDBOOK

ENVIROCARE GENERAL CATALOG

These and many others catalogs, handbooks and leaflets are avail-

able from Hanna. To receive your free copy, contact your dealer or the

nearest Hanna Customer Service Center.

MAN40R2

05/97

PRINTED IN PORTUGAL