User Guide

ManualsBrandsHanna Instruments ManualsOtherHI 9050

All Hanna Instruments meters are warranted for two years against

defects in workmanship and materials when used for their intended

purpose and maintained according to instructions.

The probes are warranted for 6 months.

This warranty is limited to repair or replacement free of charge.

Damage due to accidents, misuse, tampering or lack of prescribed

maintenance are not covered.

If service is required, contact the dealer from whom you purchased

the instrument. If under warranty, report the model number, date of

purchase, serial number and the nature of the failure. If repair is not

covered by the warranty, you will be notified of the charges incurred.

If the instrument is to be returned to Hanna Instruments, first obtain a

Returned Goods Authorization Number from the Customer Service

department and then send it with shipment costs prepaid. When

shipping any instrument, make sure it is properly packaged for

complete protection.

To validate your warranty, fill out and return the enclosed warranty

card within 14 days from the date of purchase.

All rights are reserved. Reproduction in whole or in part is prohibited

without the written consent of the copyright owner,

Hanna Instruments Inc., 584 Park East Drive, Woonsocket, Rhode

Island, 02895 , USA.

Hanna Instruments reserves the right to modify the design, con-

struction and appearance of its products without advance notice.

WARRANTYWARRANTY

WARRANTY

OTHER ACCESSORIES

HI 710002 Soft carrying case (formerly BORGM)

HI 710009 Blue rubber boot

HI 710010 Orange rubber boot

HI 710031 Hard carrying case (formerly PKGCASE)

HI 721310 9V Battery (10 pcs)

MAN40R2 Instruction Manual

Untitled-5

• CALIBRATION AND MAINTENANCE SOLUTIONS

• CHEMICAL TEST KITS

• CHLORINE METERS

• CONDUCTIVITY/TDS METERS

• DISSOLVED OXYGEN METERS

• HYGROMETERS

• ION SPECIFIC METERS (Colorimeters)

• MAGNETIC STIRRERS

• NaCl METERS

• pH/ORP/Na ELECTRODES

• pH/ORP/Na METERS

• PUMPS

• REAGENTS

• SOFTWARE

• PROBES (DO, µS/cm, RH, T, TDS)

• TITRATORS

• TRANSMITTERS

• TURBIDITY METERS

• Wide Range of Accessories

Most Hanna meters are available in the following formats:

• BENCH-TOP METERS

• POCKET-SIZED METERS

• PORTABLE METERS

• PRINTING/LOGGING METERS

• PROCESS METERS (Panel and Wall-mounted)

• WATERPROOF METERS

• METERS FOR FOOD INDUSTRY

For additional information, contact your dealer or the nearest Hanna

Customer Service Center. You can also e-mail us at:

tech@hannainst.com.

OTHER PRODUCTS FROM HANNAOTHER PRODUCTS FROM HANNA

OTHER PRODUCTS FROM HANNA