User Guide

25
25
HI 766E2 General use probe, max 900°C/1650°F
HI 766F High temperature wire probe without
handle, max 1100°C/2000°F
HI 766F1 Flexible probe without handle, max
480°C/900°F
HI 766TV1 Pipe clamp probe, max 200°C/390°F
1m
3.3’
2mm
0.08"
35mm
1.4"
Max.
1.5mm
0.06"
255mm
10"
Other accessories:
HI 710004 Soft carrying case measuring
150x90x30mm
HI 710007 Blue rubber boot measuring
155 x 90 x 45 mm
HI 710008 Orange rubber boot measuring
155 x 90 x 45 mm
HI 710031 Rugged carrying case
MANK93R4 Instruction manual
mank93r4.p65
26
26
All Hanna Instruments meters are warranted
for two years against defects in workman-
ship and materials when used for their in-
tended purpose and maintained according
to instructions.
The probes are warranted for a period of
six months.
This warranty is limited to repair or replace-
ment free of charge.
Damages due to accident, misuse, tamper-
ing or lack of prescribed maintenance are
not covered.
If service is required, contact the dealer
from whom you purchased the instrument. If
under warranty, report the model number,
date of purchase, serial number and the
nature of the failure. If the repair is not
covered by the warranty, you will be notified
of the charges incurred. If the instrument is
to be returned to Hanna Instruments, first
obtain a Returned Goods Authorization Num-
ber from the Customer Service department
and then send it with shipment costs pre-
paid. When shipping any instrument, make
sure it is properly packaged for complete
protection.
To validate your warranty, fill out and return
the enclosed warranty card within 14 days
from the date of purchase.
All rights are reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
WARRANTY
Hanna Instruments reserves the right to
modify the design, construction and ap-
pearance of its products without advance
notice.