User Guide

17
17
K for K-Type, J for J-Type, T for T-Type.
PROBE INPUT SELECTION (HI 93532
only)
When switched on, the instrument automati-
cally shows the tempera-
ture measured by Probe
1 and a "K1" appears
on the LCD display.
To view the input temperature of Probe 2,
press T1/T2 and "K2" will be displayed.
TEMPERATURE DIFFERENCE ( for
HI 93532 only)
The difference between the temperature
measured by the two probes can be dis-
played by simply pressing ∆T. A "∆" will
appear on the left-hand of the display to
indicate this function.
KJT
KTJ
T1
T2
K 2
K 1
∆T
∆
mank93r4.p65
18
18
LOW BATTERY DETECTION
When the battery is low the
user is prompted by the ap-
pearance of the word "BAT"
(for HI 93530, HI 93531,
HI 93532, HI 93551) or "Eb"
for HI 935005, HI935006 and
HI 935007 to substitute the
battery (see page 20).
AUTO-SHUT OFF
To save battery life, HI935006 will switch
off after 5 minutes and HI93530, HI 93531,
HI 93532, HI 93551, HI 935005 and HI935007
after 60 minutes.
The switch located in the battery compart-
ment enables this feature (for all models
except of HI 935006). Remove the battery
cover and slide the switch to the right. The
thermometer's auto-off feature will be dis-
abled. If the switch is to the left, the meter
will shut off automatically.
BAT
9 VOLT BATTERY
BATTERY COVER
BATTERY
AUTO-OFF SWITCH