User Guide

ManualsBrandsHanna Instruments ManualsThermometersHI 955501

Instruction ManualInstruction Manual

Instruction Manual

HI 955501

Portable

PT100 Thermometer

This Instrument is in Compliance with the CE Directives

ins

rum

RANGE

PT100

THERMOMETER

RANGE:

-199.9 to 199.9°C

-200 to 850°C

HI 955501

OFF

Untitled-9

Dear Customer,

Thank you for choosing a Hanna Instruments

Product.

Please read this instruction manual carefully

before using the instrument. This manual will

provide you with all the necessary informa-

tion for the correct use of the instrument, as

well as a more precise idea of its versatility in

a wide range of applications.

This instrument is in compliance with the

directives EN 50081-1 and EN 50082-1.

ISO 9000 Certified

Company since 1992

Preliminary Examination........................... 1

General Description .................................. 1

Functional Description &

Specifications ............................................ 2

Operational Guide..................................... 3

Display Code Guide .................................. 4

Calibration ................................................. 4

Battery Replacement ................................ 5

Shockproof Rubber Boots......................... 6

Accessories ............................................... 7

Warranty ................................................... 8

CE Declaration of Conformity .................. 9

TABLE OF CONTENTS

Summary of content (6 pages)

PAGE 1
Untitled-9 1 2 Instruction Manual HI 955501 Portable PT100 Thermometer Dear Customer, Thank you for choosing a Hanna Instruments Product. Please read this instruction manual carefully before using the instrument. This manual will provide you with all the necessary information for the correct use of the instrument, as well as a more precise idea of its versatility in a wide range of applications. This instrument is in compliance with the directives EN 50081-1 and EN 50082-1.
PAGE 2
Untitled-9 3 4 FUNCTIONAL DESCRIPTION AND SPECIFICATIONS PRELIMINARY EXAMINATION Remove the instrument from the packing material and examine it carefully to make sure that no damage has occurred during shipment. If noticeable damage is evident, notify your Dealer. ins rum n s HI 955501 comes supplied with: • 9V battery • instruction manual. HI 955501 allows temperature measurement using interchangeable PT100 probes. HI 955501 allows temperature measurements with two different resolutions: 0.
PAGE 3
Untitled-9 5 6 OPERATIONAL GUIDE INITIAL PREPARATION Slide the battery cover off the rear of your thermometer. When the battery is low the user is prompted by the appearance of the "V" symbol to replace the battery. Battery Compartment SLIDE OFF ON OFF If a temperature probe is plugged in, the unit will display the temperature. If not plugged in, the display will show "-1.". V 9 VOLT BATTERY Remove the battery and unwrap it prior to connection to the battery connector.
PAGE 4
Untitled-9 7 8 BATTERY REPLACEMENT When the battery is low the user is warned by the "V" symbol on the instrument's display. Replace the battery immediately. V Battery replacement must only take place in a non hazardous area using the battery types specified in this instruction manual (see page 7). SHOCKPROOF RUBBER BOOTS These rubber boots are specially made to prolong the life of your instruments and to prevent damages due to accidental falls. They measure 155 x 90 x 45 mm (6.1x3.5x1.
PAGE 5
Untitled-9 9 10 ACCESSORIES WARRANTY PT 100 Probes HI768A Air probe, with 1 m (3.3') cable HI768L General purpose liquid probe, with 1 m (3.3') cable HI 768P Penetration probe with 1 m (3.3') cable All Hanna Instruments meters are warranted for two years against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. 205mm 8.1" 100mm 3.9" 3mm 0.12" 100mm 3.9" 3 6mm mm 0.24" 0.12" HI 768A 205mm 8.1" 100mm 3.
PAGE 6
Untitled-9 11 12 CE DECLARATION OF CONFORMITY DECLARATION OF CONFORMITY We Hanna Instruments Srl V.le delle industrie 12 35010 Ronchi di Villafranca (PD) ITALY herewith certify that the thermometer HI 955501 has been tested and found to be in compliance with the following regulations: IEC 801-2 IEC 801-3 EN 55022 Electrostatic Discharge RF Radiated Radiated, Class B Date of Issue: 13-03-1996 D.Volpato - Engineering Manager On behalf of Hanna Instruments S.r.l.