Microphone User Manual

HI 8417

°C pH

OFF

CON

CAL

°C

6,88

7,02

4,00

9,22

10,05

BUFFER VALUES 20°C

NBS

STD

NBS

STD

NBS

STD

THE FRONT PANEL OF HI8417

ON / OFF To turn the instrument ON and OFF. (Warning:

Push the OFF key before unplugging instrument. If unplugged before

turned off, the meter's memory will be erased).

CAL To enter the calibration mode.

CON To confirm the calibration data.

°C / °C To set temperature for manual compensation.

pH/mV To select mV for mV, ORP or ISE measurements

or pH for pH measurements.

Large LCD on the left

This LCD displays the temperature measured by the HI7669/2W

probe or the value set manually with the keyboard. If the tempera-

ture has been set manually, the "°C" symbol will flash. When the

temperature probe is connected the "°C" symbol stops flashing. When

the temperature measured by the probe is out of range (-10 /

+125°C), the "Err3" signal appears.

Large LCD on the right

This LCD displays the pH or mV reading. The corresponding pH or mV

symbol will be displayed along with the measured value. An error

signal ("Err1", "Err2", "Err4" or "Err5") will appear on this display to

indicate when the range is exceeded or if the buffer during calibration

is wrong.

FUNCTIONAL DESCRIPTION &

SPECIFICATIONS OF HI8417