Datasheet

HI 98509 Checktemp®1
Digital Thermometer with Stainless Steel
probe attached to a 3.3’ silicone cable
The Checktemp®1 is a high-accuracy thermometer with a 1 m (3.3’)
exible, silicone cable connecting the meter and the stainless steel
probe. The sharp-tip penetration probe easily lances semi-solid
products such as fruits, vegetables, and cheeses. This probe can also
handle liquid, air and measurements in frozen materials. The probe
incorporates an NTC thermistor sensor to measure the temperature.
Thermistors make it possible to obtain extremely high accuracy in a
very short period of time.
The Hanna CAL CHECK® feature has been incorporated into the
Checktemp®1 for reliable and accurate measurements. CAL CHECK®
automatically runs a self check upon startup and reports status
back to the user; 0 for ok and Err if something is wrong.
Checktemp®1 makes routine controls fast and simple for both
incoming and outgoing goods. Constructed of AISI 316 stainless
steel material, this probe is in compliance with food regulations,
making it an ideal instrument for measuring temperature according
to HACCP requirements.
Select Between ºC or ºF Measurement
in One Tester
• IP65 water resistant protection
• Silicone probe cable
· 3.3’ silicone cable maintains flexibility and performance
in applications where temperatures are widely variable.
• AISI 316 stainless steel penetration probe
• CAL CHECK™
· Automatically verifies calibration at startup and alerts the user
of the calibration status.
• Save battery life with Auto-Off
· With the Auto-Off feature, select from 8 min., 60 min., or turn
the feature off.
• HACCP
· Use as a tool for control in HACCP analysis.
• Large display
· The large display features a wide environmental temperature
range and viewing angle.