User Manual

SETTING THE CLOCK
1. With the unit in CLOCK mode, press and hold the CLK / MEM button for about 1 second, the time will
begin to flash on the display.
2. Press the HOUR /

button to adjust the hour.
3. Press the MIN /

button to adjust the minute.
4. When the correct time is selected, press the CLK / MEM button again to confirm.
SETTING THE ALARMS
1. With the unit in CLOCK mode, press the AL1/+ or AL2/− button. The ALARM time will begin to flash on
the display.
2. Press the HOUR /

button to adjust the alarm hour.
3. Press the MIN /

button to adjust the alarm minute.
4. When the desired alarm time is selected, press the AL1/+ or AL2/− button to confirm.
5. Press the AL1/+ or AL2/− button to select the ALARM sound mode - buzzer or currently set radio
station. The alarm buzzer or radio indicator will light up.
SNOOZE FUNCTION
1. Whenever the alarm (radio or buzzer) activates, it can be temporarily suspended for a short period of 9
minutes by pressing the SNOOZE button once.
2. The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE period has
ended.
3. This procedure can be repeated for up to approximately one hour.
TURN OFF THE ALARM
When the Alarm activate, press the SOURCE / AL. OFF / button to turn off the Alarm.
LISTENING TO THE AM/FM RADIO
1. Press the SOURCE / AL. OFF / to select AM or FM band.
2. Press the HOUR /

or MIN /

button step by step to tune to the desired radio stations.
3. Press and hold the HOUR /

or MIN /

button for approx.1 second, it will start to search the next
radio station in the direction of the search. The search operation simply finds stations with strong signals.
Stations with weak reception can only be tuned in manually.
4. To turn off the radio, press and hold the SOURCE / AL. OFF / button for approx.. 1 second.
SETTING THE CLOCK
1. With the unit in CLOCK mode, press and hold the CLK / MEM button for about 1 second, the time will
begin to flash on the display.
2. Press the HOUR /

button to adjust the hour.
3. Press the MIN /

button to adjust the minute.
4. When the correct time is selected, press the CLK / MEM button again to confirm.
SETTING THE ALARMS
1. With the unit in CLOCK mode, press the AL1/+ or AL2/− button. The ALARM time will begin to flash on
the display.
2. Press the HOUR /

button to adjust the alarm hour.
3. Press the MIN /

button to adjust the alarm minute.
4. When the desired alarm time is selected, press the AL1/+ or AL2/− button to confirm.
5. Press the AL1/+ or AL2/− button to select the ALARM sound mode - buzzer or currently set radio
station. The alarm buzzer or radio indicator will light up.
-3-