User Manual

SETTING THE CLOCK
1. With the unit in CLOCK mode (RADIO off), press and hold the TIME/MEM/M+
button for about 1 second, the time will begin to flash on the LED display.
2. Press the HOUR button to adjust the hour.
3. Press the MIN button to adjust the minute.
4. When the correct time is selected, press the TIME/MEM/M+ button again to
confirm.
SETTING THE ALARMS
1. With the unit in CLOCK mode (RADIO off), press and hold the AL1 or AL2
button. The ALARM time will begin to flash on the LED display.
2. Press the HOUR button to adjust the alarm hour.
3. Press the MIN button to adjust the alarm minute.
4. When the correct time is selected, press the AL1 or AL2 button to confirm.
5. Press the AL1 or AL2 button to select the ALARM sound mode – [B] buzzer or
[R] currently set radio station. The corresponding LED indicator will light up.
SNOOZE FUNCTION
1. Whenever the alarm (buzzer or radio) activates, it can be temporarily suspended
for a short period of 9 minutes by pressing the SNOOZE/SLEEP/DIMMER
button once.
2. The buzzer or radio will then automatically activate again after the 9 minutes
SNOOZE period has ended.
3. This procedure can be repeated for up to approximately one hour.
TURN OFF THE ALARM
When the Alarm activate, press the /AL OFF button to turn off the Alarm.
LISTENING TO THE RADIO
1. Press the /AL OFF button to select the FM radio mode
2. Press the SKIP+ or SKIP− buttons step by step to tune to the desired radio
stations.
3. Press and hold the SKIP+ or SKIP− buttons for approx. 1 second, it will start to
search the next radio station in the direction of the search. The search operation
simply finds stations with strong signals. Stations with weak reception can only
be tuned in manually.
4. Press the VOL+ or VOL− button to adjust the sound to the desired listening
level.
5. For Better reception, fully extend and adjust the position and direction of the AC
adapter cord that acts as an FM antenna.
-3-
SAVING A RADIO STATION TO THE MEMORY
1. Tune the radio to the desired station.
2. Press the TIME/MEM/M+ button for approx. 1 second, the LED display will show
PXX where ‘XX’ is the next radio station number in the memory
3. Press the SKIP+ or SKIP− button to select the desired station number then
press the TIME/MEM/M+ button to store the station in the memory.
4. Up to 10 FM radio stations can be stored in the memory.
TO LISTEN TO A SAVED RADIO STATION
Press the TIME/MEM/M+ button to select the stored radio station.
SLEEP TO MUSIC FUNCTION
1. This function allows you to listen to the radio while you fall asleep.
2. Press the SNOOZE/SLEEP/DIMMER button, the display will show the default
sleep time of 90 minutes showing in the display.
3. Press the SNOOZE/SLEEP/DIMMER button again to adjust the desired sleep
time.
4. Now you can enjoy listening to the radio for the pre-set period of sleep time.
5. After this pre-set time has elapsed, the unit will switch off automatically.
DISPLAY BRIGHTNESS
Press the SNOOZE/SLEEP/DIMMER button to change the display brightness.
TURN OFF THE RADIO
Press the /AL OFF button to turn off the radio.
CHARGE YOUR DEVICES (1A CHARGING)
Connect the standard size end of a USB cable (not included) to the USB port on
the unit and connect the other end to the charging port your device.
Remarks: Some devices may not support USB charging or may require a higher
power rating than this product provides. Observe the charging status on your
device. Ensure your device is working properly before attempting to charge.
Charging function may not be supported for all phones or electronic devices
SPECIFICATIONS
Frequency Range: FM: 87.5 - 108 MHz
Power Supply: AC 100-240V ~ 50/60 Hz
Rated Output DC5V 1.5A
Back-Up Battery: 2 pcs. UM4 “AAA” size (Battery not included)
USB Charging: 1A
Specifications are subject to change without prior notice.
-4-