User Manual

CD OPERATION
Playing Audio CDs
1. Set the FUNCTION switch to CD/USB/BT/AUX position.
2. Press and hold the MODE/CD/USB/BT button to select CD mode.
3. Insert the CD disc in the CD compartment and close the CD door, the unit will start
reading the disc, the LCD display will show the total number of tracks of the entire disc
after reading and start playing the first track of the entire disc.
4. Adjust the VOLUME control to the desired volume level.
5. During playing, press the PLAY/PAUSE button to temporarily pause playing. To resume,
press the PLAY/PAUSE button again.
6. To stop playing, press the STOP button.
Playing MP3 disc
1. Set the FUNCTION switch to CD/USB/BT/AUX position.
2. Press and hold the MODE/CD/USB/BT button to select CD mode.
3. Insert a MP3 disc in the CD compartment and close the CD door, the unit will start
reading the disc, it will show the total number of folder and total number of MP3 files
on the entire disc after reading and start playing the first MP3 files on the entire disc.
4. Adjust the VOLUME control to the desired volume level.
5. If your MP3 disc has folders, press the FOLDER+ button to go to the next folder.
6. During playing, press the PLAY/PAUSE button to temporarily pause playing. To
resume, press the PLAY/PAUSE button again.
7. To stop playing, press the STOP button,
Playing MP3 files with USB device
1. Set the FUNCTION switch to CD/USB/BT/AUX position.
2. Press and hold the MODE/CD/USB/BT button to select USB mode.
3. Plug your USB device into the USB port on the unit, the unit will start reading the files
in the USB device, it will show the total number of folder and total number of MP3 files
on the USB device after reading and start playing the first track on the entire device.
4. Adjust the VOLUME control to the desired volume level.
5. If your MP3 has folders, press and hold the FOLDER+ button to go to the next folder..
6. During playing, press the PLAY/PAUSE button to temporarily pause playing. To
resume, press the PLAY/PAUSE button again.
7. To stop playing, press the STOP button.
Skip Mode
1. During play or pause mode, press the SKIP UP button to go to the next track.
2. If the MP3 disc or storage device has folders, when the end of the folder is reached,
press the SKIP UP button will go to the first MP3 file of the next folder.
3. During play or pause mode, press the SKIP DN button to go back to the previous
track.
4. While playing, press the SKIP DN button once will go to the beginning of that track.
5. While playing, press the SKIP DN button twice will go back to the previous track.
6. If the MP3 disc or storage device has folder, when reaching the beginning of the folder,
press the SKIP DN button will go to the last file of the previous folder.
-4-
Programming
The programming of the player should be done during STOP mode.
1. Press the PROGRAM button, the LCD display will show P01 and  flash continuously.
2. Press the SKIP UP or SKIP DN button to select the desired track.
3. Press the PROGRAM button again to store this track in memory, the LCD display will
show P02 and  flash continuously.
4. Repeat steps from 2 to 3 to store more tracks in the memory.
5. For Audio CD, you can store up to 20 tracks in the memory and for MP3 files, you can
store up to 99 tracks in the memory. .
6. Press the PLAY/PAUSE button to play the disc in the programmed order.
7. To stop playing, press the STOP button.
8. To cancel the programming list, press the STOP button and open the CD door or set
the FUNCTION switch to other position.
Different Play Mode
During CD or MP3 playback, press the MODE/CD/USB/BT button to select different kinds
of play mode with the following sequence.
For CDA files : Repeat One  Repeat All  Normal
For MP3 files : Repeat One  Repeat Folder  Repeat All  Normal
 Repeat One (Repeat icon appear on the LCD display and blink continuously) –
repeat the track being played.
 Repeat All (Repeat icon appear on the LCD display) – repeat all the tracks in the
storage device.
 Repeat Folder (Repeat icon and FOLDER appear on the LCD display) – repeat the
tracks in the entire album/folder.
 Normal – play the tracks in sequence.
MP3/AUX IN CONNECTION
1. Set the FUNCTION switch to CD/USB/BT/AUX position.
2. Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the
line-out jack or phones jack on your MP3 player and the other side to the aux-in jack
on the unit.
3. Turn on your MP3 player and follow the playback instruction.
4. To stop this function, simply turned off your MP3 player.
Note : While the unit is in CD, USB or BT mode, insert the audio cable will
automatically go to the AUX mode.
SPECIFICATIONS
Frequency Range: AM 520 - 1710 KHz
FM 87.5 - 108 MHz
Power Supply: AC 120V ~ 60Hz
Battery: 6 pcs. “C‘’ size ( 6 X 1.5V )
Specifications are subject to change without further notice.
-5-