User Manual
AC OPERATION
Connect the plug to the AC socket of the unit and the other end to a standard AC outlet.
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands.
2. When planning not to use this unit for a long time, disconnect the power cable from the wall outlet.
3. When disconnecting the power cord from the wall outlet, do not pull on the cord in order to avoid shock
risks caused by damaged cable.
BATTERY OPERATION
Disconnect the AC cord set completely. Open the battery compartment door and insert 6 pieces UM-2 "C"
size batteries into the battery compartment with battery polarity as shown inside the battery compartment.
RADIO OPERATION
1. Slide the Function Switch to RADIO position.
2. Slide the Radio Band Switch band selector to AM or FM position.
3. Turn the Radio tuning control to your desired radio station.
4. Adjust the sound level by rotating the Volume Control.
ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations. For AM reception, the unit has a
built-in antenna, turn the whole unit for best reception.
BLUETOOTH OPERATION
1. Slide the Function Switch to BT position to select BLUETOOTH mode
2. ‘bt’ and the bluetooth logo start blinking continuously in the LCD display.
3. Turn on the Bluetooth of your Bluetooth device and search the boombox unit for connection. Your
Bluetooth device should find “HX-321CD HANNLOMAX” (If password is needed for connection, please
enter “0000”.)
4. When the connection is successful, the Bluetooth logo will stop blinking.
5. Select and play the audio file though your Bluetooth device.
6. Press the SKIP+ to skip to the next track.
7. Press the SKIP -to skip to the previous track.
8. To turn off the Bluetooth, slide the Function Switch to BT position to select BLUETOOTH mode
AUTO PAIRING
Once the unit paired with the Bluetooth device, it will automatically pair with that device next time when you
turn on the unit and that Bluetooth device.
MP3/AUX IN CONNECTION
1. Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out jack or
phones jack on your MP3 player and the other side to the aux-in jack on the unit.
2. Turn on the unit and slide the Function Switch to CD/USB/AUX position.
3. Turn on your MP3 player and follow the playback instruction.
4. Adjust the sound level by rotating the Volume Control.
5. To stop this function, simply turned off your MP3 player.
STEREO HEADPHONE JACK
For private listening, insert the plug of a stereo headphone into the phones jack and adjust the Volume
control accordingly. During the use of a headphone, the speakers are automatically disconnected.
-3-
CD/MP3 DISC FUNCTION
To play a CD/MP3 disc, please follow the steps below :
1. Slide the Function Switch to the CD/USB/AUX position.
2. Insert the CD/MP3 disc with the printed side facing up and close the CD door. It will play the tracks
automatically.
3. To pause playing the disc, press the PLAY/PAUSE button. To resume playing the disc, press
PLAY/PAUSE button again. .
4. Adjust the Volume Control to the desired volume level.
5. To stop playing the disc, press the STOP button.
PLAYING MP3 FILES WITH USB DEVICE
1. Slide the Function Switch to the CD/USB/AUX position.
2. Press the CD/USB button to select the USB mode, ‘USB’ will appear on the LCD display.
3. Plug your USB device into the USB port on the unit, the unit will start reading the files in the USB
device. It will play the tracks automatically.
4. Press the PLAY/PAUSE button to start playing the MP3 files.
5. To pause playing the MP3 files, press the PLAY/PAUSE button. To resume playing the MP3 files,
press PLAY/PAUSE button again. .
6. Adjust the Volume Control to the desired volume level.
7. To stop playing the MP3 files , press the STOP button.
SKIP MODE
1. During play or pause mode, press the SKIP + button will go to the next track.
2. During play or pause mode, press the SKIP - button will go back to the previous track.
3. If your MP3 disc/USB has folders, you can use the FOLDER+ button to select the next desired folder.
REPEAT MODES
Press MODE button repeatedly when playing the tracks for different repeat modes.
For Audio CDs : Repeat One Repeat All Normal
For MP3 Files : Repeat One Repeat FOLDER Repeat All Normal
Repeat One – repeat the track being played. (the repeat sign in the LCD display will flash
continuously)
Repeat folder – repeat the tracks in the entire album/folder.(the repeat sign with FOLDER in the LCD
display will stay lighted)
Repeat All – repeat all the tracks in the storage media. (the repeat sign in the LCD display will stay
lighted)
Normal – play the tracks in sequence.
PROGRAMMING THE TRACK
The programming should be done during STOP mode
1. Press the PROGRAM button, the LCD display will show P01.
2. Use the SKIP +or SKIP - button to select the desired track.
3. If your storage device has folders, you can use the FOLDER +button to select the folder.
4. Press the PROG button again to store the selected track in the memory, the LCD display will show
P02 .
5. Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 20 tracks for CD and 99
tracks for MP3 in the memory.
NOTE: if memeory is full, LCD display will show “FUL”.
6. Press the PLAY/PAUSE button to start playing the disc in the programmed order.
7. To stop playing, press the STOP button.
8. To cancel the programming list, press the STOP button twice and open the CD compartment door or
set the FUNCTION switch to OFF position.
-4-