XX-R0000 GT Series Liquid Crystal Display Television
English Preface About this manual Thanks you for purchasing the HANNspree LCD Colour Television! We are pleased to present a product that has been designed with excellent quality, reliability ,and performance to make your viewing experience more satisfying than before. This manual provides detailed descriptions on how to use this product, and adjust the picture and colour quality to according to your personal preferences.
English Important safety information WARNING CAUTION This symbol is intended to tell the user that parts inside the product pose a risk of electric shock to persons. RISK OF ELECTRIC SHOCK; DO NOT OPEN CAUTION: CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to tell the user that important operating and servicing instructions are described here.
• Note to CATV system installer: This note is to remind the CATV system installers that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry practical. CAUTION: IF the set is not going to be used for a long period ,such as during a vacation, unplug the set from the wall outlet to economise power.
English Handling the LCD screen • Do not leave the LCD screen facing the sun as it can damage it .Take care when you place the TV by a window . • Do not push or scratch the LCD screen .Do not place a heavy object on the LCD screen. This may cause the screen to lose conformity or cause LCD panel malfunctions. • If the TV is used in a cold place ,a smear may appear on the screen. This is not a malfunction .The screen will return to normal as its temperature rises to a normal operating level.
Overview of the LCD TV 1 Features 1 Product components 1 Front view 2 Rear view Remote control 3 4 Getting started 6 Inserting the remote control batteries Connecting power Cable connections 6 Basic operate 10 Using the OSD menus 6 7 12 Picture Adjustment Image Adjustment Setup Adjustment Audio Adjustment. Tuner Adjustment.
English
Features Enjoy the versatility of your LCD TV with its wide variety of features: •Colour active matrix TFT LCD TV with remote control •Safe, sturdy construction •Maximum display resolution: 32”37” 1366X768 •Audio / Video support : —Component (YCbCr / YPrPb) video input —S-Video input —Two SCART audio / video input —Two HDMI (two analog audio) input —VGA input —Composite video input —Composite audio output —3.
English Front view CHANNEL VOLUME Speaker Power Indicator LED Speaker CH/ Increases or decreases channel numbers. VOL / Increases or decreases the volume. MENU Press the button to enter On Screen Display (OSD). SOURCE Switch among the input source . POWER Turn the TV set ON or OFF.
English Rear view S C A R T 2 S C A R T 1 PC AUDIO IN S- IN(vedio) R L (red) (white) (audio) AV- IN L V Cr/Pr (white) Cb/Pb (yellow) V (red) L (blue) L R (red) P P O O R (white) R (white) T R T R 2 1 (red) (red) R L C O (green) M P L O N E (white) N T R I N (red) AUDIO OUT (red) (white) SCART1, SCART2 Connects to the scart output of your A/V device (SCART 1 is always RF out, SCART 2 is optional of CVBS out ,RF out and SCART CVBS out.
English Remote control 1 POWER 2 SLEEP DISPLAY AV/S/SCART HDTV/PC/HDMI WIDE MUTE VIDEO MODE 1 2 3 4 5 6 7 8 9 / 0 LAST 一 一一 SELECT 8 10 11 12 ZOOM INDEX 13 SUBPAGE 7 9 MENU 5 6 EXIT TELETEXT SURROUND 4 SOUND 3 14 一 15 TV/DTV GUIDE LIST FAVORITES HOLD INFO SUNTITLE TEXT 16 17 18 19 1.POWER Turn power ON or OFF. 2.DISPLAY Press to display the information of input signal. 3.MUTE Disables the audio output. 4.
21 22 POWER SLEEP DISPLAY AV/S/SCART HDTV/PC/HDMI WIDE 1 2 3 4 5 6 7 8 9 / 0 一 一一 23 MUTE VIDEO MODE SOUND LAST EXIT 26 27 28 29 30 31 TELETEXT MENU 25 SELECT 24 SURROUND 一 ZOOM TV/DTV GUIDE INDEX SUBPAGE LIST FAVORITES HOLD INFO SUNTITLE TEXT 32 Display the channel information ( MHEG ) ( in UK) 19.SUBTITLE Display the DTV subtitle directly. 20.SLEEP Press repeatedly to set the off timer from 10 to 180 minutes . 21.
English Getting started Please refer to the following sections for detailed instructions about connecting the audio /video (AV) device of your LCD TV and view your favorite programmes or movies .These sections describe the basic procedures required to set up your TV for easy and convenient viewing Inserting the remote control batteries Insert the two AAA batteries provided into the remote control as described below: 1.
The LCD Colour Television provides multiple input and output ports to enable you to connect different types of A/V devices such as an antenna or CATV line ,a VCR / VCD / DVD player ,a satellite receiver or even a PC. The back panel of the LCD TV provides input and output jacks to make these connections possible. The following sections discuss the various ports and the types of A/V devices that can be connected to your TV .
English 5 HDMI cable Connect to device with HDMI output such as DVD player, VCR / VCD player etc.... 7 6 Audio cable Connect to device with audio output such as DVD recorder, VCR, Home theater audio equipment etc.... ANT cable ANALOG ANT. DIGITAL ANT. It is strongly recommended that you connect the antenna using a 75Ω coaxial cable to get optimum picture and sound quality .A300Ω twin lead cable can be easily affected by radio and other background noise ,resulting in signal deterioration .
Refer to these notes before connecting any audio / video equipment to this TV : • Refer to the manuals of your TV, stereo ,or other equipment . • Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you have completed connecting everything. Never make or change connections when equipment stall connected to a power outlet . • Connect DVD player directly to the TV. For example ,do not connect DVD player to VCR and then connect the VCR to your TV.
1 Turn ON the LCD TV Press to turn on or off the power of LCD TV. The indicate light is green when power ON and red when power OFF. CHANNEL CH 3 VOLUME VOL 4 2 MENU Switch the input source Press keys to switch the input source : SOURCE POWER 2 repeatedly to switch between AV, Press S-Video and SCART . 1 Press repeatedly to switch between HDTV, PC and HDMI . Press repeatedly to switch between TV and DTV .
Press POWER 8 SLEEP DISPLAY AV/S/SCART HDTV/PC/HDMI WIDE 6 MUTE VIDEO MODE 1 2 4 5 6 7 8 9 / 0 LAST 一 一一 7 3 SELECT TELETEXT Press repeatedly to switch the display mode : WIDE, AUTO, FILL ALL, 1 TO 1 ,NORMAL, ZOOM, ANAMORPHIC . 7 Video mode adjustment Press repeatedly to switch the video mode : PERSONAL, STANDARD, VIVID, MILD . MENU SURROUND 一 ZOOM TV/DTV GUIDE INDEX SUBPAGE LIST FAVORITES HOLD INFO Press to display the teletext sub page .
English Using the OSD MENU The On-Screen Display (OSD) menu system provides a quick and simple method to adjust LCD TV base setting. OSD menu can be viewed using both the remote control and the control buttons on the front panel . Picture Img.
• The picture Adjustment enable you to adjusts brightness, contrast, sharpness, colour, tint, colour temp and backlight. 1 Press or Picture Img.
English 4 Press or + - to switch the preset picture mode: PERSONAL, STANDARD ,VIVID, MILD Picture Img.Adj Setup Preset Audio STANDARD Brightness 50 Contrast 50 Sharpness 50 Color 50 50 Color Temp STANDARD Backlight Menu:Exit 50 Next (Colour Temp) adjustment Adjusts the image colour intensity: STANDARD ,COOL, WARM ,NATURAL. Tuner Tint Repeat step 1.
• The Image Adjustment enable you to adjusts image size and setting freeze frame. 1 Press or Picture Img.Adj to enter OSD menu Setup Audio Preset Tuner STANDARD Brightness 50 Contrast 50 Sharpness 50 Color 50 Tint 50 Color Temp STANDARD Backlight Menu:Exit 2 POWER SLEEP DISPLAY 2 3 4 5 6 7 8 / 0 一 一一 Setup SELECT MENU 一 ZOOM GUIDE CHANNEL VOLUME Menu:Exit 3 Next INDEX Picture Img.
English 4 Press or + - to switches image size :WIDE, AUTO, FILL ALL, 1 TO 1, NORMAL ,ZOOM, ANAMORPHIC Repeat step 1.2 Press keys to select item and press or + - to adjust setting (Freeze Frame) adjustment Wide :5% off the top and bottom. 16.5% non-liner stretch right and left. Fill all :Display full screen. Choose to freeze or un-freeze the frame on the screen. (H Position) adjustment Adjust the horizontal position of display.
• The setup Adjustment enable you to adjusts OSD language, sleep timer. • You can reset all OSD setting in this option. 1 Press or Picture Img.Adj to enter OSD menu Setup Preset Audio Tuner STANDARD Brightness 50 Contrast 50 Sharpness 50 Color 50 Tint 50 Color Temp STANDARD Backlight Menu:Exit 2 SLEEP DISPLAY AV/S/SCART HDTV/PC/HDMI WIDE MUTE 2 3 4 5 6 7 8 / 0 一 一一 SELECT MENU ZOOM GUIDE Audio Tuner English 50 Reset V 2.
English B Press keys to select (Sleep Timer) item and press or + -to set off timer to 10 through 180 MIN. (10..20..30...180). Picture Img.Adj Setup Language Audio Tuner English Sleep Timer 50 Reset Repeat step 1.2 Press keys to select item and press or + - to adjust setting (Reset) adjustment Press key to restore to the factory original setting. (Firmware Version) Shows the firmware version . V 2.
• The audio Adjustment enable you to adjusts volume, treble, bass, balance and speaker output . 1 Press or Picture Img.
English 4 Press or + - to switch the preset AUDIO mode: STANDARD ,MILD, PERSONAL Picture Img.Adj Setup Audio (Volume) adjustment Tuner Volume 50 Preset Adjusts the overall volume of the speakers. STANDARD Treble 50 Bass 50 Balance 50 Speaker Mute ON OFF Surround ON OFF Menu:Exit Repeat step 1.2 Press keys to select item and press or + - to adjust setting Next 050 (Balance) adjustment Balance the volume of right and left speakers.
• The tuner Adjustment enable you to adjusts tuner setting and programme setting. • Tuner Adjustment only can be operated in tuner system. . 1 Press or Picture Img.
English A Press keys to select (Auto search channels) item and press to start scan channels. Repeat step 1.2 Press keys to select item and press or + - to adjust setting (Search New Channels) Picture Img.Adj Setup Audio Press key to start search new channels and add new channel to original channel list .
1 Press menu button then press or + - to select [ Tuner ] mode. Press keys to select (Programme Edit ) item and press Press keys to select item and press to adjusts Picture Img.Adj Setup Audio Tuner TV Tuner Setting Programme Edit Programme 001 Manual Search Fine Tune 471.
The DTV OSD (On-Screen Display ) menu present user a consistent look and feel throughout. User can adjust the DTV channel system setting in this menu . Press the MENU button to enter analog TV system OSD (in DTV mode) and select “Tuner “option Press button to select “DTV MENU “item Press button to enter DTV OSD menu The DTV OSD will show on the screen after user adjust the option, pressing “SELECT “ key to start option adjustment. Please press “EXIT“ button to exit the DTV menu .
It is very important to do channel searching before user start DTV system. When the system is first time switched on, user will be asked to select country then press “SELECT” key . First Time Installation UK Welcome! Choose your country : Continue installation : SELECT Select “yes” and automatic search will start.
English Channel Search If User only want to renew the channel list , user may choose AUTOMATIC SEARCH: 1. In DTV main menu, press key to “Settings” sub-menu and press “SELECT” key to enter “ Setting ” sub-menu. 2. In “Settings” sub-menu, press key to “Installation” sub-menu and press “SELECT” key to enter. Main Menu Channel List Settings Configuration Favourites Language Guides Installation Installation Settings Automatic Search Manual Search First Time Installation 3.
“Channel List “ allows user to edit channel list and provides the following features: 1.Select : Select the channel 2.Delete : Delete the channel 3.Edit Name: Editing a channel’s name 4.Lock : Lock the channel for parental control. Press “SELECT “ button to lock or unlock the channel. The default password is “0000” 5.Favourites : Enter the “Edit Favorite Lists” and edit the favorite channel programme list This function cannot be accessed if there are no channels available.
English Favourites “Favourites “ enable user to select a subset of channel they consider favourite .It allows to have up to 5 list. User can enter this option via main menu or “channel list ” option. Press button to select List1/2/3/4/5 and press select a channel and press “SELECT “to add a icon. The icon indicate the channels that are members of a favourites list. When favourites mode is done ,pressbutton on the remote control will only show those channel which be marked .
EPG (Electronic Programme Guide) allows the user to view the current programme playing on each channel . In “Guides” option , includes these item : 1).Now / Next EPG 2).List Schedule EPG 3).TimeLine Schedule EPG Main Menu Channel List Favourites Guides Settings Guides Now/Next EPG List Schedule EPG Timeline Schedule EPG 1).Now / Next EPG: This item will display current and next programmes. User can navigate up and down the list of channels and highlighted programme can be displayed by press “info ”.
English 2).List Schedule EPG: User may view more detail for the programme playing now or the programme highlighted in the schedule list using yellow and blue keys respectively. This item presents the user two information panel. Left side list displays all available channels. The right side list display two hours of schedule information for the currently channel service, its title shows the time span covered by the list.
This option offer user to adjust the setting of DTV MENU and provide the following features: Main Menu 1) Configuration Channel List 2) Language 3) Installation Favourites Settings Guides Configuration Settings Language Installation 1)Configuration The “configuration “ provides the following adjust ion features: A:Time Zone Setting “Time Zone” B:DST Setting “daylight-saving Time” on or off C:Subtitle Subtitle of DVB can be enabled / disabled using the “subtitle” button on the remote control or in this
English 2) Language Here the user can set the preferred and the current language of both the audio and subtitles. The system language refer to the language used for all UI text throughout the menu. Default system language is set to “English” By setting the current language the user can choose from the language available for a particular selected service. Only language available for the current service will be offered as an option.
This item offer user to scan channel signal and provides the following ways: (1) Automatic Search (see page 25,26 ) (2) Manual Search (3) First Time Installation (see page 25,26) (2) Manual Search Manual search allows user to scan an individual channel. The user enter the channel number to be scanned, only those channels supported by the tuner may be entered. This item display a bar indicating the quality and strength of the signal of the currently selected channel.
English Other Dialog 1)Current Service Banner The Current Service Banner provides information about the current service, and is display as a result of various events: *When power turn ON *After “First Time Installation” *Channel selected has changed ,and video is full screen. *When press “INFO “ button The current service banner containing the following information: .Current channel name and number .Time .Channel signal strength .Now and next programme name and start / end times .
Display Active screen size Aspect ratio Resolution viewing angle I/O ports 32,37 inchs SCART 16:9 YPb input (Y Cb/Pb Cr/Pr) 32”,37” 1366*768 S-IN input AV input 32” 176/176 PC input 37” 176/176 Audio jack input(L/R) PC audio in Anttena system Tuner Number of tuners Standards 2 B/G,D/K,L/L,I Number of programmes 99 Digital Anttena system Colour system PAL,SECAM Other Video Progressive scan 2:2 /3:2pull down Noise reduction English Specifications √ √ √ Audio out (L/R) HDMI input 2 1 1 1 1 5 1 1
English Troubleshooting No power • • Make sure the TV and the power cord are connected correctly Check if you pressed POWER on the remote control unit .If the indicator in the front panel is red ,press POWER in the remote control or the front panel . LCD TV does not operate • External influences such as lightning or static electricity may cause improper operation. In this case, operate the unit after first turning on the power ,or un-plugging the AC cord and plugging it in again after 1 to 2 minutes.
