HL190/HL199 HL229/HL249 HL269 HSG 1212/ HSG 1213 HSG 1214/ HSG 1215 HSG 1216
User’s Manual OSD[V5.7] Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
User’s Manual RECYCLING INFORMATION We, the Hanns.G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, which can be re-decomposed and re-integrated into brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned substances.
User’s Manual TABLE OF CONTENTS SAFETY NOTICE ..................................................................................................... 5 PRECAUTIONS.................................................................................................... 5 SPECIAL NOTES ON LCD MONITORS ......................................................... 6 BEFORE YOU OPERATE THE MONITOR ......................................................... 7 FEATURES..........................................................
User’s Manual SAFETY NOTICE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. 4.
User’s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the • • • • Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.
User’s Manual BEFORE YOU OPERATE THE MONITOR FEATURES Model: Size: HL190 HL199 HL229 HL249 HL269 47cm/ 18.5” 48,3cm/ 19” 54,6cm/ 21.5” 60cm/ 23.
User’s Manual INSTALLATION INSTRUCTIONS HL190/ HL199/ HL229/ HL249 INSTALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Turn the monitor over and set it upside down. 2. Align the monitor to the slots on the stand. 3. Pull the screw ring upwards, then turn the screw clockwise to secure. When the stand is securely attached to the monitor, pull down the screw ring to flatten it with the base of the screw. 4.
User’s Manual HL269 INSTALL REMOVE Figure.2. Installing and Removing the Base INSTALLATION: 1. Turn the monitor over and set it upside down. 2. Insert the bracket into the slot on the display. 3. Using a screwdriver, secure the 4 screws clockwise to fix the bracket to the display. Make sure the screws are all tightened. 4. Align the slot on the base with the bottom of the bracket. 5. Pull the screw ring upwards, then turn the screw clockwise to secure.
User’s Manual SETTING THE MONITOR ON THE WALL DISSEMBLING THE STAND BASE: 1. Disconnect all the cables and cords from the Monitor to prevent breakage. 2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Monitor. 3. Remove the 5 screws (HL190/ HL199/ HL229/ HL249). 4. Using a screwdriver, remove the 4 screws securing the display to the base by turning them counterclockwise (HL269). 5. Gently remove the stand base.
User’s Manual MAKING CONNECTIONS CONNECTING TO A PC Turn off your computer before performing the procedure below. 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s VGA port. 2. Connect one end of the DVI cable (optional) to the back of the monitor and connect the other end to the computer’s DVI port. 3. Connect the audio cable between the monitor's audio input and the PC's audio output (green port). 4.
User’s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the monitor’s angle from -5° to 15°. Figure.4. Monitor Angle NOTES: • Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 5). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the Signal cable from the monitor to the VGA card. • Press the power button to turn on the monitor. The power indicator will light up.
User’s Manual FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor’s power. • Power Indicator: Blue —Power On mode. Flickering —Power Saving mode. • MENU / RETURN: Turn the OSD menu on/off or return to the previous menu. • Adjust ▲▼: [The availability of this function depends upon the selected model] 1. Adjust Brightness and volume when the OSD is off. 2. Navigate through adjustment icons when OSD is ON or adjust a function when function is activated.
User’s Manual Resolution 640×400@70Hz ↔ 720×400@70Hz 640×400@85Hz ↔ 720×400@85Hz 640×480@60Hz ↔ 720×480@60Hz 1024×768@70Hz ↔ 1280×768@70Hz 1280×768@60Hz ↔ 1360×768@60Hz 1400×1050@60Hz ↔ 1680×1050@60Hz 1400×1050@RB 60Hz ↔ 1680×1050@RB 60Hz 1400×1050@75Hz ↔ 1680×1050@75Hz 1440×900@60Hz ↔ 1600×900@60Hz 1360×768@60Hz ↔ 1366×768@60Hz 1280×960@60Hz ↔ 1600×900@60Hz ** The screen resolutions available will depend on the purchased model.
User’s Manual HOW TO ADJUST A SETTINGS BRIGHTNESS/ CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select「BRIGHTNESS」option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference. Select「CONTRAST」option to adjust the contrast value. ACTIVE CONTRAST Optimal setting for high contrast images or videos.
User’s Manual display, which does not ensure the image is shown as is or in initial scale. 「FIT」indicates scaling by the proportion of original images, which may cause the screen showing black bands. [The availability of this function depends upon the selected model] H-POSITION Select the 「H-POSITION」option to shift the screen image to the left or right. Enter the option and adjust the level. [For VGA only] V-POSITION Select the 「V-POSITION」option to shift the screen image up or down.
User’s Manual the OSD. Enter the option and adjust the level. OSD TIME-OUT Select 「OSD TIME-OUT」option to set the OSD time out from 10 to 100 seconds. Enter the option and adjust the level. OSD COLOR To choose the color combination of the OSD window, select 「OSD COLOR」option under 「OSD SETTING」menu, choose modes 1/2/3.
User’s Manual PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel.
User’s Manual TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible. *Check if the Video Card is Plug & Play compatible. *Check if any plug pins on the VGA or DVI connector are bent. The display is too dark or too bright. *Adjust the Contrast and Brightness Controls.
User’s Manual INPUT as a PC option, and make sure PC audio output cable is connected to monitor’s LINE IN port(or AUDIO IN port). [For HDMI Input only] Addendum related to Windows 7 When you encounter display problem under Windows 7, you need to do the following: 1. Make sure your PC computer (Hardware requirement) can support Windows 7. 2. Make sure your video card can run Windows 7. 3. If your video card can support Windows 7, need to install the latest Win 7 driver of your video card.
User’s Manual ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connected, if the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.
User’s Manual 27 28 29 30 31 1440×900 @60Hz 1440×900 @75Hz 1400×1050 @60Hz 1680×1050 @60Hz 1920×1080 @60Hz 55.469 70.635 64.744 65.290 67.500 59.901 74.984 59.948 59.954 60.
User’s Manual APPENDIX SPECIFICATIONS HL190 LCD Panel Video Driving system TFT Color LCD Size 47 cm / 18.5” Diagonal Pixel pitch 0,3 mm(H) × 0,3 mm(V) H-Frequency 24KHz – 61KHz V-Frequency 56Hz – 75Hz Display Colors 16.7M Colors Max. Resolution 1366 × 768 @60Hz Plug & Play VESA DDC2BTM Power consumption ON Mode 18 W-19.6 W (Typical) Power Saving Mode ≤ 0.5 W OFF Mode ≤ 0.5 W Audio output (optional) Rated Power 1.0 W rms (Per channel) Input Terminal VGA Maximum Screen Size Hor.
User’s Manual SPECIFICATIONS HL199 LCD Panel Video Driving system TFT Color LCD Size 48,3 cm / 19” Diagonal Pixel pitch 0,283 mm(H) × 0,283 mm(V) H-Frequency 24KHz – 75KHz V-Frequency 56Hz – 75Hz Display Colors 16.7M Colors Max. Resolution 1440 × 900 @75Hz Plug & Play VESA DDC2BTM Power consumption ON Mode 18 W (Typical) Power Saving Mode ≤ 0.5 W OFF Mode ≤ 0.5 W Input Terminal VGA Maximum Screen Size Hor. : 408.24 mm Ver. : 255.15 mm Power Source 100–240V ～1.
User’s Manual SPECIFICATIONS HL229 LCD Panel Video Driving system TFT Color LCD Size 54,6 cm / 21.5” Diagonal Pixel pitch 0,248 mm(H) × 0,248 mm(V) H-Frequency 30KHz – 83KHz V-Frequency 56Hz – 75Hz Display Colors 16.7M Colors Max. Resolution 1920 × 1080 @60Hz Plug & Play VESA DDC2BTM Power consumption ON Mode 24 W (Typical) Power Saving Mode ≤ 0.5 W OFF Mode ≤ 0.5 W Audio output Rated Power 1.0 W rms (Per channel) Input Terminal VGA DVI (optional) Maximum Screen Size Hor.
User’s Manual SPECIFICATIONS HL249 LCD Panel Video Driving system TFT Color LCD Size 60 cm / 23.6” Diagonal Pixel pitch 0,271 mm(H) × 0,271 mm(V) H-Frequency 30KHz – 83KHz V-Frequency 56Hz – 75Hz Display Colors 16.7M Colors Max. Resolution 1920 × 1080 @60Hz Plug & Play VESA DDC2BTM Power consumption ON Mode 24 W (Typical) Power Saving Mode ≤ 0.5 W OFF Mode ≤ 0.5 W Audio output Rated Power 1.0 W rms (Per channel) Input Terminal VGA DVI (optional) Maximum Screen Size Hor. : 521.
User’s Manual SPECIFICATIONS HL269 LCD Panel Video Driving system TFT Color LCD Size 66,04 cm / 26” Diagonal Pixel pitch 0,3 mm(H) × 0,3 mm(V) H-Frequency 30KHz – 75KHz V-Frequency 56Hz – 60Hz Display Colors 16.7M Colors Max. Resolution 1920 × 1080 @60Hz Plug & Play VESA DDC2BTM Power consumption ON Mode 33.2 W (Typical) Power Saving Mode ≤ 0.5 W OFF Mode ≤ 0.5 W Audio output Rated Power 2.0 W rms (Per channel) Input Terminal VGA DVI (optional) Maximum Screen Size Hor. : 575.
