拉頁寬度縮減至172mm 封底 拉頁 封面 LED-TV User’s Manual LED-TV SL-Series English Deutsch User’s Manual Français Thank you for purchasing this Hannspree product. For more detailed information, please refer to www.hannspree.com/eu HANNspree produces various products. If you are interested to know more about that kindly visit: www.eu-shop.hannspree.
拉頁寬度縮減至172mm 封底 拉頁 封面 LED-TV User’s Manual LED-TV SL-Series English Deutsch User’s Manual Français Thank you for purchasing this Hannspree product. For more detailed information, please refer to www.hannspree.com/eu HANNspree produces various products. If you are interested to know more about that kindly visit: www.eu-shop.hannspree.
拉頁寬度縮減至172mm 封底 拉頁 封面 LED-TV User’s Manual LED-TV SL-Series English Deutsch User’s Manual Français Thank you for purchasing this Hannspree product. For more detailed information, please refer to www.hannspree.com/eu HANNspree produces various products. If you are interested to know more about that kindly visit: www.eu-shop.hannspree.
Regulatory Information.......................2 Customizing the Input Settings.....15 Description of Warning Symbols.......2 Changing Your Location................15 Safety Notices......................................2 Resetting to Factory Default Settings.........................................15 Preface. ................................................4 Warranty and Service / Repair............4 Cleaning...............................................4 3. Adjusting On-Screen Display (OSD) Settings.
ENGLISH Regulatory Information CE Conformity Statement This device is in conformity with the requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility and Directive 2006/95/EC on the harmonization of the laws of Member States relating to electrical equipment for use within certain voltage limits.
ENGLISH Copyright © Copyright 2011 Hannspree, Inc. All rights reserved. This manual is protected by copyright and distributed under licenses restricting its use, copying and distribution. No part of this manual may be reproduced in any form by any means without the prior written authorization of Hannspree. The TV described in this manual may include copyrighted software of Hannspree (or other third parties).
ENGLISH Notes: • The LED TV is for entertainment use only and visual display tasks are excluded. • This device uses a VGA connector to connect to a PC. To reduce the influence of main frequency on the source signal, use a VGA monitor cable with ferrite shield. Preface Thank you for purchasing a Hannspree LED TV. Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology.
ENGLISH 1. Getting Started Package Contents Make sure the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged.
ENGLISH Foot Stand Installation 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. n Install only with another person’s assistance. n Make sure to distinguish between the front and back of the stand when assembling them. 2 Attach the foot stand as shown in the illustration and secure it with the four included screws. Please fasten with a cross screw driver.
ENGLISH Installing the Wall Mount Kit Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Hannspree is not responsible for any damage to the product or injuiry to yourself or others if you select to install the TV on your own. n Do not install your Wall Mount Kit while your TV is turned on.
ENGLISH Control Panel SL 32 SL 40 1 2 3 4 5 6 No. Description 1 8 Button Function Press to increase the program number or move upward to the previous item on the OSD menu. During standby mode, press to turn the TV on. Program select Press to decrease the program number or move downward to the next item on the OSD menu. During standby mode, press to turn the TV on. Press to increase the volume or move to the right on the OSD menu.
ENGLISH Input and Output Jacks Please refer to the front cover illustration for the Input & Output location. No. Description Connector Function Connect to a digital audio output device such as a home theater. 1 SPDIF 2 Earphone Output 3 CI CI SLOT Connect to a CI device. 4 HDMI 1/HDMI 2/ HDMI 3 Input HDMI Connect a HDMI equipment or an HDMIDVI adapter cable to devices such as a DVD player or set-top box. 5 USB USB Connect to a USB device such as a USB flash drive or USB hard disk drive.
ENGLISH Remote Control 1 Source Press to select the input signal type selections. 2 Keypad Press to select a program directly. Press 0-9 to enter the program numbers (press 1 and 0 for program 10) 3 ECO Press to toggle ECO dynamic backlight setting. 4 Menu Press to access the main menu or to return to the previous menu. 5 Arrows p q To navigate in the main menu, to select menu options, to switch to the previous or next photo, song, video or text in USB mode.
ENGLISH 2. Setting up your TV Power Connection 1 Connect the power cord to the AC IN input jack on the rear of the TV. 2 Insert the plug at the other end of the power cord into a power outlet. Rear Connections See the illustration and table below for device connection instructions. Connection Order HDMI is the best way to connect a device. If it’s not available, move down the list in order until you find a connection that’s available on each device.
ENGLISH Using the TV Turning the TV On and Off 1 Press on the control panel or remote control to turn the TV on. 2 Press again. The power LED turns red, indicating that the TV is off. Running Setup Wizard The Setup Wizard is displayed on the screen when you turn on your LED TV for the first time. Note: • Press p/q on the remote control to move through the menu. Press OK to select. 1 The Wizard appears to guide you through the initial setup. Press OK to start.
8 Press OK when channel scan is your location. Initial Setup ENGLISH 7 Once the automatic search ends, select completed. Location Initial Setup Complete Please select your location: Home Congratulations !! Shop Completed Initial Setup. Please press [OK] to exit. Back Select Next Exit Exit Back Selecting Your Content Source You can watch cable or broadcast TV, play DVD or connect to your PC. Source TV To select the source signal: CMP No label • Press Source on the remote control.
ENGLISH 2 Press VOL - on the control panel or - on the remote control to decrease the volume. 3 Press Mute to eliminate sounds, and press Mute again or press the volume buttons to restore the original volume. Setting Up Your Favorite Channels 1 Press LIST. 2 Press the yellow button to enter Channel list selection. Press p/q to select the favorite list you want to set up your favorite channels. Then press OK to enter the selected list. 3 Press the blue button to start to edit your favorite list.
ENGLISH Customizing the Input Settings 1 Press Menu on the remote control to display the main menu. 2 Select TV > Input settings and press OK/u to enter its submenu. 3 Press p/q to select a connector your equipment is connected to. 4 Press t/u to select the device type that is attached to this connector. 5 Press Menu to return to the TV menu. Note: • After configuring the above setting, the selected source label will be displayed after the name selected in the source list.
ENGLISH 3. Adjusting On-Screen Display (OSD) Settings The On-Screen Display (OSD) menu system provides a quick and simple method to adjust the TV settings. The OSD menu can be accessed conveniently through the buttons on the remote control. Before going into details of each OSD option, you may get acquainted with the placement of the OSD system: Main Menus: Display the main menus.
ENGLISH On-Screen Menus Selection Follow the instructions indicated on the left side of the OSD Function Menu. • Press P /P on the remote control or p/q arrow keys to scroll through the menus. • Press VOL + on the control panel or the u arrow key to enter a correspond submenu. • Press VOL +/VOL - on the control panel or the t/u arrow keys to adjust the desired setting. • Press MENU on the control panel or Exit to exit the OSD menu.
ENGLISH Auto format Advanced video VGA (only shown on VGA source) Enable/disable the aspect ratio selection automatically (On/Off). Noise reduction Reduce the noise level (High/Off/Low). Light sensor Enable/disable the light sensor to detect the current level of visible light in the surrounding environment (On/Off). Auto adjust (Sychronize the display automatically). H. Position Adjust the position of the image left and right (0~100). V.
Option Description Language Menu language Set the on-screen display language. Preferred audio language Set the audio language. Preferred audio language 2nd Set the second audio language. Country Select your country (United Kingdom/Italy/Luxembourg/Netherlands/Norway/ Sweden/Croatia/Hungary/Ireland/Poland/Portugal/ Romania/Serbia/Slovakia/Slovenia/Turkey/Estonia/ Bulgaria/Greece/Russia/Ukraine/Latvia/Lithuania/Austria/ Belgium/Switzerland/Czech Republic/Germany/Denmark/ Spain/Finland/France).
ENGLISH Input settings VGA Name HDMI1 Name HDMI2 Name Set the device name (No label/DVD/Blu-ray/HDD/ DVDR/HD rec./Game/VCR/PC/ Digital STB/HD dig STB/Camera/ Recorder/Other). HDMI3 Name Decode Decode analog channels. Diagnostics Display the diagnostics information about the TV. * Only available for digital channels. Time Shift Enable/Disable the time shift feature (On/Off). Reset Reset all LED TV operational settings to the factory default settings (OK/Cancel).
Set the teletext language for digital broadcast (Basque/ Bulgarian/Catalan/Croatian/Czech/Danish/Dutch/English/ Finnish/French/Gaelic/Galician/German/Greek/Hungarian/ Italian/Icelandic/Norwegian/Polish/Portuguese/Romanian/ Russian/Sami/Serbian/Slovak/Slovenian/Spanish/Swedish/ Turkish/Welsh). SPDIF type Select the SPDIF type mode (PCM/Off/Dolby D). SPDIF Delay (only available when SPDIF type is set to PCM) Adjust the SPDIF delay time to synchronize the sound with the picture (0~250).
ENGLISH Parental Option Description Channel lock Block any channels that you do not want to watch or that you do not want your children to watch. Parental rating Age rating Input lock Select the input source that you want to block (TV/CMP/ AV/VGA/HDMI1/HDMI2/HDMI3). Front panel lock Enable/Disable the front panel lock feature (On/Off). Installation lock Enable/Disable the Installation lock (On/Off). Max volume Set the maximum volume (0~100).
Plug a USB device to the USB connector on the TV. When this USB device is detected, it enters the Media Center menu directly. Photo Select Music OK Enter ENGLISH Media Center Video Exit Exit Viewing Photos 1 Select Media Center > Photo, then press OK to enter the main file content browser. 2 In the main file content browser, use p/q/t/u to select a photo or an inner file folder. n Select an inner file folder, press OK to enter a sub file content browser.
ENGLISH Watching Videos 1 Select Media Center > Video, then press OK to enter the main file content browser. 2 In the main file content browser, use p/q/t/u to select a video or an inner file folder. n Select an inner file folder, press OK to enter a sub file content browser. n Press Menu to display the video menu in the folder mode. - Sort: Sort folders and videos by Type, Date, or Name. - Edit: Copy, Paste, or Delete a selected video.
Situation ENGLISH 4. Troubleshooting Solution • • Connect the power cord properly. Check if the power LED is on or not. • • Press on the control panel or remote control. Press Source to cycle through connected video sources. • • Press P or P on the remote control or the control panel to switch to other TV programs. Make sure all cables are connected properly. No picture, or poor picture, sound is OK. • • Check the antenna and cable connections. Adjust the Brightness in the Picture menu.
ENGLISH 5.
Model No. SL32UMNB ENGLISH 6. Specifications SL40UMNB DISPLAY Screen Size 31.
