22” Liquid Crystal Display Monitor 2438501293P
REGULATORY INFORMATION Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
RECYCLING INFORMATION HANNspree Inc. cares about environmental protection strategies and in using manufacturing methods and treatments that lend themselves to conservation and recycling devices at the end-of-life. Our products, whenever possible, contain recyclable materials which can be recycled into new devices. When necessary for operation, other materials may be classified as hazardous or poisonous substances. We strongly encourage you to research the provided information about recycling this device.
SAFETY NOTICE 1. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.
• Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric shock. Never spill liquids on the monitor. • Do not attempt to service the monitor by yourself; opening or removing covers can expose you to dangerous voltages and other hazards. Please refer all service issues to qualified service personnel.
• Due to the nature of LCD screens, an after image of the previous displayed content may remain if this image has been the displayed for several hours. The LCD screen should recover if the image is changed or powered off for several hours. • If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or service center for repair. Do not attempt to repair the monitor yourself.
PREFACE Thank you for purchasing a Hannspree Liquid Crystal Display Monitor (LCD Monitor). Please carefully read this manual in its entirety before setting up, using or operating your Monitor. To ensure the safe and correct installation and operations of the Monitor, it is important that the safety and operation instructions in this manual are followed. This instruction manual is designed to assist you in setting up and using the Monitor.
Content Safety Precautions .............................................................................8 First Setup ..........................................................................................9 Quick Installation ................................................................................9 Front View of the Product ...................................................................10 Rear View of the Product....................................................................
Safety Precautions This monitor is manufactured and tested on a ground principle that a XVHU¶V VDIHW\ FRPHV ¿UVW +RZHYHU LPSURSHU XVH RU LQVWDOODWLRQ PD\ UHVXOW danger to the monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS: This monitor should be operated only at the correct power sources indicated on the label on the rear end of the monitor.
First Setup Congratulation for purchasing this monitor of high performance! This monitor comes with the following accessories : z Power cable z D-Sub cable (15 pin) z Audio cable z HDMI Cable (Optional) z DVI-D/HDMI Cable (Optional) z Warranty and Service Manual z CD ROM (including User’s manual) Quick Installation 1. Connect video cable (D-Sub cable) Make sure both monitor and computer are powered OFF. Connect the video cable (D-Sub cable) to the computer, then to the monitor. 2.
Front View of the Product ᄏ ᄎ ᄐ ᄋ ᄌᄍ ᄋ OSD TURN ON/OFF ᄌ SCROLL DOWN/DECREASE ᄍ SCROLL UP/INCREASE ᄎ CONFIRM SELECTION ᄏ POWER ON/OFF ᄐ LED INDICATOR Rear View of the Product ᄑ ᄑ POWER INPUT ᄒ AUDIO INPUT 10 ᄓ ᄒ ᄓ HDMI INPUT (HDMI 19 PIN) VGA INPUT (D-SUB 15 PIN)
Using On Screen Display (OSD) Functions 1 2 ŸRU ź Display main menu. Exit from OSD menu. Auto adjust the image when at root menu. &RQ¿UP WKH VHOHFWLRQ Select the desired item when in OSD menu. When not in OSD menu, it is to immediately activate Contrast/ Brightness. It should be change to Contrast/ Brightness by pressing button ź . When not in OSD menu, it is to immediately activate Screen 16:10/ 4:3. It should be change to aspect ratio by pressing button Ÿ .
Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position,Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Contrast : To adjust the foreground white level of screen image. Ÿ : increase contrast, ź: decrease contrast. DCR ON/OFF : Contrast ratio will be Њ 2500:1, when DCR turn on. Brightness : To adjust the luminance of the video. Ÿ: increase brightness, ź : decrease brightness.
H./V. Position : To adjust the horizontal and vertical position of the video. H. Position : Ÿ : move screen to the right, ź : move screen to the left. V. Position : Ÿ : move screen up, ź : move screen down. Fine Tune : To adjust the delay time of data and clock. Press ź or Ÿ to adjust to your preference. Sharpness : To adjust the clarity of a non-WSXGA (1680x1050) signal with ź or Ÿ button. Aspect Ratio : To select the Aspect ratio is 16:10 or 4:3.
Supporting Timing Modes VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 74.
Technical Information 7HFKQLFDO 6SHFL¿FDWLRQ LCD Panel 22.0” TFT Power Management Energy Star compliant VESA DPMS compatible <1W Displayable Resolution WSXGA 1680 x 1050 max. Vertical Frequency 60Hz max. Pixel Dimension 0.282 x 0.282 mm LCD Display Color 16.7M Tilt 0°~20° Active Display Area 473.76 mm x 296.
Care and Maintenance Care z Avoid exposing your monitor directly to sunlight or other heat source. Place your monitor away from the sun to reduce glare. z Put your monitor in a well ventilated area. z Do not place any heavy things on top of your monitor. z Make certain your monitor is installed in a clean and moisture-free area. z Keep your monitor away from magnets, motors, transformers, speakers, and TV sets.
ファックス
