9” Liquid Crystal Display Monitor MAF-001002 M19W2/M19N2
Table of Contents REGULATORY INFORMATION.................................................................. 2 RECYCLING INFORMATION...................................................................... 4 SAFETY NOTICE ........................................................................................ 5 PREFACE .................................................................................................... 8 BEFORE YOU OPERATE THE MONITOR................................................. 9 FEATURES...
REGULATORY INFORMATION Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TCO’03 (TCO’03 applied model only) Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.
RECYCLING INFORMATION HANNspree Inc. cares about environmental protection strategies and in using manufacturing methods and treatments that lend themselves to conservation and recycling devices at the end-of-life. Our products, whenever possible, contain recyclable materials which can be recycled into new devices. When necessary for operation, other materials may be classified as hazardous or poisonous substances. We strongly encourage you to research the provided information about recycling this device.
SAFETY NOTICE 1. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.
• Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric shock. Never spill liquids on the monitor. • Do not attempt to service the monitor by yourself; opening or removing covers can expose you to dangerous voltages and other hazards. Please refer all service issues to qualified service personnel.
• Due to the nature of LCD screens, an after image of the previous displayed content may remain if this image has been the displayed for several hours. The LCD screen should recover if the image is changed or powered off for several hours. • If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or service center for repair. Do not attempt to repair the monitor yourself.
PREFACE Thank you for purchasing a Hannspree Liquid Crystal Display Monitor (LCD Monitor). Please carefully read this manual in its entirety before setting up, using or operating your Monitor. To ensure the safe and correct installation and operations of the Monitor, it is important that the safety and operation instructions in this manual are followed. This instruction manual is designed to assist you in setting up and using the Monitor.
BEFORE YOU OPERATE THE MONITOR FEATURES • 19” screen TFT Color LCD Monitor • Crisp, Clear Display • Recommended Resolutions: 19” Wide (16:10) 1440 X 900 19” (5:4) 1280 X 1024 • EPA ENERGY STAR • Ergonomic Design • Space Saving, Compact Case Design • HDMI 1.1 Compatibility CHECKING THE CONTENTS OF THE PACKAGE The product package should include the following items: LCD Monitor Screen Base * Note: The screen and base designs will vary from model to model.
Cables and User manual Power Cord HDMI Cable (Optional) Audio Cable d an ual nty an rra e M Wa rvic Se DVI-D/HDMI Cable (Optional) D-SUB Cable Warranty and Service Manual CD ROM (including User’s manual) * Note: Images are for illustration only and may vary by model or region. POWER POWER SOURCE: 1. 2. 3. 10 Make sure that the power cord is the correct type required in your area.
CONTROLS AND CONNECTORS CABLE CONNECTIONS Turn off your computer before performing the procedure below. 1. 2. 3. Connect one end of the 15-pin D-SUB cable to the back of the monitor and connect the other end to the computer’s D-SUB port. -orConnect one end of a 19-pin HDMI to the back of the monitor. Connect the other end to the computer's 24-pin DVI-D port. -orConnect one end of a 19-pin HDMI to the back of the monitor. Connect the other end to an HDMI device, such as a DVD.
AC IN HDMI D-SUB Audio IN 3 5 4 1 2 Figure 1.
ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when changing the screen's angle. • You are able to adjust the monitor’s angle at 20º alternative from -5º to 15º or 0º to 20º. • For more information, please refer to the Quick Start Guide of your Monitor model. Figure 2.
OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the Signal cable from the monitor to the computer. • Press the power button to turn on the monitor. The LED will turn green. 5 4 3 6 2 1 Figure 3.
FRONT PANEL CONTROL • Power Button: Press this button to switch the monitor on and off. • Power Indicator (LED): Green — Power On mode Orange — Power Saving mode • MENU / ENTER: 1. Activate the OSD menu or adjust the function settings and confirmation. 2. Exit OSD menu when in volume OSD status. 3. Confirm the selection when in Auto Adjustment/Source Select OSD. • W VOL- / VOL+ X • 1. Activate the volume control when the OSD is OFF. 2.
HOW TO ADJUST A SETTING OSD Description Brightness adjustment: Main Menu OSD Select the “Brightness” option from the Main Menu. Press MENU key and adjust the level. ETC Brightness 50 80. 0KHz / 75. 0Hz 1280x1024 In D-SUB input, main menu OSD can show PC input timing. Brightness adjustment: Select the “Brightness” option from the Main Menu. Press MENU key and adjust the level. Main Menu OSD ETC Brightness 50 In HDMI input, main menu OSD can show HDMI input timing.
Horizontal position adjustment: Image Setting Select the “H-position” option to shift the screen image to the left or right. Press MENU key and adjust the level. H-Position 50 Vertical position adjustment: Image Setting Select the “V-position” option to shift the screen image up or down. Press MENU key and adjust the level. V-Position 50 Clock adjustment: Image Setting Clock Adjustment 50 Select the “Clock Adjustment” option to reduce the vertical flicker of characters on the screen.
HDMI Setting Video Mode Normal Vivid HDMI Setting Backlight Mode High Low Main Menu OSD ETC Color Setting 80. 0KHz / 75. 0Hz 1280x1024 18 Video mode: Select the “Video Mode” option to set the image quality when using the HDMI input. Press MENU key to select Normal or Vivid. Backlight Mode: Select the “Backlight Mode” option to adjust the backlight for the display brightness when using the HDMI input. Press MENU key to select High or Low.
Change Color Settings for D-SUB source: Color Setting 5500 6500 9300 Move the cursor to one of the preset options and select it. 6500K 63 63 50 Change Color Settings for D-SUB source: Color Setting 6611 7611 :411 User R G B 50 50 50 Move the cursor to the User option and select it. 1.To adjust the red, enter the “R” option and adjust the level. 2.To adjust the green, enter the “G” option and adjust the level. 3.To adjust the blue, enter the “B” option and adjust the level.
How to set the OSD: Main Menu OSD ETC OSD Setting Select “OSD Setting” from the Main Menu, and then press MENU key. 80. 0KHz / 75. 0Hz 1280x1024 OSD horizontal adjustment: OSD Setting OSD OSD OSD OSD H-Position 50 OSD vertical position adjustment: OSD Setting OSD OSD Select the “OSD H-Position” option to adjust the horizontal position of the OSD. Press MENU key and adjust the level. Select the “OSD V-Position” option to adjust the vertical position of the OSD.
OSD Transparency setting: OSD Setting OSD OSD Select the “OSD Transparency” option to adjust the transparency of the OSD. Press MENU key and adjust the level. OSD OSD Transparency 0 1 2 3 4 5 6 OSD color setting: OSD Setting OSD OSD OSD OSD Color 1 2 3 4 5 6 OSD Setting OSD OSD OSD Language ᓄវ͛̚ ᖎវ͛̚ ͟ώᄬ English Deutsch Francais Espanol Italiano Portugues Nederlands Main Menu OSD Select the “OSD Color” setting option to adjust the color of the OSD.
DDC/CI: Other Setting A B OSD ? When DDC/CI is enabled, users are allowed to configure the software monitor settings in Windows Vista. Select the “DDC/CI” option to enable or disable the DDC/CI support for the Windows OS. Press MENU key to select On or Off. (Used by D-SUB input) DOS DDC/CI On Off Note: Windows, Vista are registered trademarks of Microsoft Corporation. Volume adjustment: Other Setting A B OSD ? Select the “Volume“ option to change the volume level.
Other Setting OSD A B ? DOS Near Timing Mode On Select the “Near Timing Mode” option to enable or disable this function. Press MENU key to select On or Off. Off Other Setting OSD A B ? DOS DOS Mode 720X400 OSD DOS mode: Select the “DOS mode” option to set the monitor for use with PC. Press MENU key and select 720 x 400 or 640 x 400.
PLUG AND PLAY ( Plug & Play DDC2B Feature) This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the computer or host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bidirectional data channel based on the protocol. The host can request EDID information over the DDC2B channel.
TECHNICAL SUPPORT (FAQ) TROUBLE SHOOTING PROBLEM POSSIBLE SOLUTION Power LED is not on • Check the power cord. No Plug & Play or screen image is stretched / seems out of proportion. • Check if the PC system is Plug & Play compatible. • Check if the Video Card is Plug & Play compatible. • Inspect the monitor's video cable for bent or broken pins. Picture is dim, too bright or fuzzy • Adjust the Clock, Phase or Contrast and Brightness Controls.
Screen image is not centered or sized properly. • Adjust pixel frequency CLOCK and PHASE or press hot-key (AUTO). Picture has color defects (white does not look white) • Adjust RGB color or select color temperature. Horizontal or vertical disturbances on the screen • Use Windows 95/98/2000/NT/ME/XP; "shut-down mode. • Adjust CLOCK" and PHASE or perform hotkey (AUTO). ERROR MESSAGE & POSSIBLE SOLUTION • CABLE NOT CONNECTED : 1. Check whether the signal-cable is properly connected.
FACTORY PRESET TIMING TABLE: TIMING 640x350 640x400 640x480 640x480 640x480 640x480 720x400 832x624 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 1024x768 1024x768 1152x864 1280x960 1280x1024 1280x1024 * 1440x900 * 1440x900 * 1360x768 MODE VGA-350 VGA-GRAPH VGA-480 APPLE MAC-480 VESA-480-72Hz VESA-480-75Hz VGA-400-TEXT APPLE MAC-800 SVGA VESA-600-60Hz VESA-600-72Hz VESA-600-75Hz XGA COMPAQ-XGA VESA-768-70Hz VESA-768-75Hz APPLE MAC-768 75Hz 60Hz VESA-1024-60Hz VESA-1024-75Hz VESA-1440-60Hz VESA
HDMI TIMING TABLE: 28 MODE TIMING RESOLUTION V-FREQ.(Hz) 1 2 3 4 5 6 7 8 9 VGA/60 Hz 720p/60 Hz 1080i/60 Hz 480p/60 Hz 480i/60 Hz 720p/50 Hz 1080i/50 Hz 576p/50 Hz 576i/50 Hz 640x480p 1280x720p 1920x1080i 720x480p 720(1440)x480i 1280x720p 1920x1080i 720x576p 720(1440)x576i 59.94/60 59.94/60 59.94/60 59.94/60 59.
APPENDIX SPECIFICATIONS LCD Panel Model NO. M19W2 M19N2 Display size 19"(16:10) 19"(5:4) Pixel Pitch 0.2835(H)x0.2835(V) 0.294(H)x0.294(V) Video Input R.G.B. Analog Interface Digital (Dual-Input Model) H/V TTL H-Frequency 31KHz-80KHz V-Frequency 56-75HZ Display Colors 16.2M Colors Max. Resolution 1440 x 900 Plug & Play VESA DDC2B EPA ENERGY STAR ON Mode ≤ 36W OFF Mode ≤ 1W Audio maximum power output Input Connector Maximum Screen Size Power Source 1280 x 1024 <1.
LM08: 610*535*210 mm LM01: 465*193*482 mm Dimensions (W*D*H) LM02: 485*212*402 mm LM03: 449*293*416 mm LM05: 449*180*409 mm Max: 485*293*482 mm Weight (GW/NW) Max. 8kg/6.5kg Regulatory Compliance UL/CUL, BSMI, CCC, CE, CB, PSB, FCC, VCCI, C-TICK NEMKO-GS*, TCO'03* The above specification is subject to actual panel specification and is subject to change without prior notice. * Applies to specific compliant models only.
CONNECTOR PIN ASSIGNMENT • 15-Pin Color Display Signal Cable: 1 11 PIN NO. • DESCRIPTION 5 15 PIN NO. DESCRIPTION 1 Red 9 +5V 2 Green 10 Cable Detection 3 Blue 11 Ground 4 Ground 12 DDC-Serial Data 5 Ground 13 H-Sync 6 R-Ground 14 V-Sync 7 G-Ground 15 DDC-Serial Clock 8 B-Ground HDMI Color Display Signal Cable: 19 18 PIN NO. DESCRIPTION 1 2 PIN NO.
• 7 TMDS Data 0+ 17 CEC/GND 8 TMDS Data 0 shield 18 +5V Power 9 TMDS Data 0- 19 Hot Plug Detect 10 Clock + 24-Pin Color Display Signal Cable: (Dual Input Mode) 1 PIN NO. 8 16 24 DESCRIPTION PIN NO.
ファックス
