惠科海外有限公司 HKC OVERSEAS LIMITED UM cover SC24
惠科海外有限公司 HKC OVERSEAS LIMITED UM cover SC24
Regulatory Information.......................2 Changing the OSD Language.......16 Safety Notices......................................2 Resetting to Factory Default Settings.........................................16 Description of Warning Symbols.......2 Preface. ................................................4 Warranty and Service..........................5 Cleaning...............................................5 1. Getting Started.................................6 3.
ENGLISH Regulatory Information FCC Compliance Statement1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Additional Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Personal Safety • To avoid overloading the power supply, never plug too many electrical devices into an outlet, power strip, or extension cable. • Dangerous high-voltage electric power components are located inside the TV. To avoid electric shock, do not disassemble the casing. • Do not place or drop metals, small objects, or flammable materials into the vent of the TV.
ENGLISH Copyright © Copyright 2011 Hannspree, Inc. All rights reserved. This manual is protected by copyright and distributed under licenses restricting its use, copying and distribution. No part of this manual may be reproduced in any form by any means without the prior written authorization of Hannspree. The TV described in this manual may include copyrighted software of Hannspree (or other third parties).
ENGLISH Warranty and Service For complete warranty service information, please refer to the “Warranty card” enclosed with your TV. As an ENERGY STAR® Partner, Hannspree has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. It meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of these goverment agencies, designed to promote energy efficient products and practices.
ENGLISH 1. Getting Started Package Contents Make sure the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged. Use r's Man ual Quick Guide Start TV User’s manual Quick start guide Warra nt y Card Warranty card INPUT LAST Attenti on Car d War Stickerar nty INFO MENU OK RETURN GUIDE MUTE VOL Attention card Warranty sticker Power cord TV stand TV column Screws CH MTS ASPECT FAV. SLEEP C.C.
ENGLISH Foot Stand Installation 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. n Install only with another person’s assistance. n Make sure to distinguish between the front and back of the stand when assembling them. 2 Attach the foot stand as shown in the illustration and secure it with the four included screws. Please fasten with a cross screw driver.
ENGLISH Installing the Wall Mount Kit Wall mount kits (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount kits. Contact a technician for assistance when installing the wall mounted bracket. Hannspree is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own. n Do not install your wall mount kit while your TV is turned on.
ENGLISH Control Panel SC24LMUB VOL + - 1 CH 2 MENU 3 INPUT 4 5 7 No. Description 1 2 Volume adjust Channel select 6 Button Function VOL+ Press to increase the volume or toggle the selection/ move to the right on the OSD menu. VOL- Press to decrease the volume or move to the left on the OSD menu. CH Press to increase the program number or move upward to the previous item on the OSD menu. CH Press to decrease the program number or move downward to the next item on the OSD menu.
ENGLISH Input and Output Jacks Please refer to the front cover illustration for the Input & Output location. No. Description Connector 1 Earphone Output Connect to earphones or external speakers with built-in amplifier. 2 USB Connect to a USB flash drive. 3 Cable/Antenna Connect to an antenna or cable TV. 4 AV IN2 AVInput IN2 / YPbPr Composite (AV1/AV2) Connect to an external device, such as a VCR, STB, or a DVD player.
ENGLISH Remote Control LAST 1 INPUT Press to select the input signal. 14 LAST 1 13 INPUT 2 Keypad Press to select a program directly. Press 0-9 to enter the program numbers (press 1 and 0 for program 10). 15 MENU 2 LAST 3 14 4 3 DASH INFO MENU Press to select the DTV sub-channel. 4 INFO Press to display program information (if available). 5 6 7 GUIDE Press to enter a submenu or activate a setting. 6 GUIDE RETURN 17 MUTE VOL ASPECT 9 10 11 18 CH MTS SLEEP FAV. C.C.
ENGLISH 2. Setting up your TV Power Connection 1 Connect the power cord to the AC IN input jack on the rear of the TV. 2 Insert the plug at the other end of the power cord into a power outlet. 3 Press the AC power switch to turn on the power supply. Rear Connections See the illustration and table below for device connection instructions. 3 AV IN2 / YPbPr * Typical Layout AV1/AV2 1 YPbPr 2 YPbPr AV IN2 AV IN2 / YPbPr HDMI AV IN2 Connection Order HDMI is the best way to connect a device.
ENGLISH Using the TV Turning the TV On and Off 1 Press on the control panel or remote control to turn the TV on. The power LED indicator turns blue, indicating that the TV is on. 2 Press again. The power LED turns red, indicating that the TV is off. Running Setup Wizard The Setup Wizard is displayed on the screen when you turn on your LCD TV for the first time. Note: • Press / on the remote control to move through the menu. Press OK to select.
ENGLISH 7 The channel scan may take a while to complete. Once the automatic search ends, the TV automatically switches to the first channel found. Installation Guide - Autoscan 69000000 Current Frequency Total Channels Found Status DTV Scanning Progress Press Return to skip DTV scan Hz 0 Return Selecting Your Content Source You can watch cable or broadcast TV, play DVD or connect to your PC. To select the source signal: • Press INPUT on the remote control. The Input Source menu appears.
ENGLISH Adjusting the Volume 1 Press VOL + on the remote control or the control panel to increase the volume. 2 Press VOL - on the remote control or the control panel to decrease the volume. MUTE MUTE 3 Press to eliminate sounds, and press the original volume. again or press the volume buttons to restore Setting Up Your Favorite Channels 1 Press MENU on the remote control or the control panel to display the main menu.
ENGLISH 3 Toggle OK or to select your location (Home or Retail). 4 Press MENU on the remote control to close the menu. Changing the OSD Language 1 Press MENU on the remote control or the control panel to display the main menu. 2 Select Setup ( ) > Language. 3 Toggle OK or to select the desired language. 4 Press MENU on the remote control to close the menu. Resetting to Factory Default Settings 1 Press MENU on the remote control or the control panel to display the main menu.
ENGLISH 3. Adjusting On-Screen Display (OSD) Settings The On-Screen Display (OSD) menu system provides a quick and simple method to adjust the TV settings. The OSD menu can be accessed conveniently through the buttons on the remote control. Before going into details of each OSD option, you may get acquainted with the placement of the OSD system: Adjustable Options: Display the setting/value of the adjustable options.
ENGLISH On-Screen Menu Selection Follow the instructions indicated on the bottom of the OSD Function Menu. • Press CH menus. / CH on the control panel or the / arrow keys to scroll through the • Press VOL+ on the control panel or OK to enter a corresponding submenu. • Press VOL+/VOL- on the control panel or the / arrow keys to adjust the desired setting, and press VOL+ on the control panel or OK to confirm the selection.
ENGLISH Reset all Picture settings to the factory default settings. Restore Default Note: The options available on the OSD may vary depending on the input signal source. Audio Option Description Select a preset audio option optimized for different sounding conditions (Default/Club/Dance/Live/Pop/Rock/ User) and adjust the equalizer for 200HZ, 300HZ, 1KHZ, 3KHZ, 8KHZ, or 15KHZ settings (-6~6). Equalizer Balance Adjust the sound balance between the left and right speakers (L50~L1, 0, R1~R50).
ENGLISH PC Setting (*only for VGA connection) Option Description Auto Adjust Sychronize the display automatically. Position H Adjust the position of the image left and right (0~100). Position V Adjust the position of the image up and down (0~100). Phase Adjust to reduce horizontal noise (0~63). Clock Adjust to reduce vertical noise (0~100). Note: The OSD menu will appear when the input source is Computer. Setup Option Description Language Set the on-screen display language.
Caption Mode Select the Closed Caption service. Digital Caption Options Customize the display types and font styles in digital programs. Location Set your current location (Home/Retail). Energy saving Set to reduce the TV’s power consumption by lowering the backlight level. (On/Off). Time Sleep Timer Set the timer to turn the TV off at the preset time (Off/5 min./10 min./15 min./30 min./45 min./60 min./90 min./120 min./150 min./180 min./240 min.).
ENGLISH Basic Operation 1 Turn on the TV. 2 Plug a USB device to the USB connector on the TV. 3 Press INPUT on the remote control. The Input Source menu appears. 4 Press / to select USB, then press OK to confirm. 5 The USB thumbnail mode browser appears. Select the media type of the file you wish to play. 764.48 MB Free / 1.88 GB Total Media Center Photo 6 Use / to browse the files and press OK to confirm.
Situation Solution • • Connect the power cord properly. Check if the power LED is on or not. • • Press on the control panel or remote control. Press INPUT on the remote control or control panel to select the connected video sources. • • Press CHp or CHq on the remote control or CH or CH on the control panel to switch to other TV programs. Make sure all cables are connected properly. No picture, or poor picture, sound is OK. • • Check the antenna and cable connections.
ENGLISH 5.
Model No. ENGLISH 6. Specifications SC24LMUB DISPLAY Screen Size 59.9 cm / 23.
