HannsBook SN12E2 Series USER’S MANUAL
Trademark: All trademarks are the property of their respective owners. Version: User’s Manual V1.0 for Notebook. CA UT IO N Symbol Description: ! Caution: Refers to important information that can help you to use Notebook better, and tells you how to avoid problems. WEEE: The use of this symbol indicates that this product may not be treated as household waste.
Safety Precautions The following safety precautions will increase the life of the Notebook. Please follow all precautions and instructions. Except as described in the manual, refer all servicing to CA UT IO N qualified personal. ! ■ Do not place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged. ■ Do not expose to dirty or dusty environment. And Do not operate during a gas leak.
Table of Contents Chapter 1 Introduction to Your Notebook Accessories........................................................................................................ 2 External Appearance.......................................................................................... 3 Setting Up Your Computer................................................................................. 7 Touchpad Usage..............................................................................................
Notebook Introduction to Your Notebook ■ Accessories ■ External Appearance ■ Setting Up Your Computer ■ Touchpad Usage ■ Special Function Keys 1
1-1 Accessories Check your product package for the following items: ● Notebook ● Battery Pack ● Adapter ● AC Power Cable 1 ● Driver DVD ● Recovery DVD ● Quick Installation Guide ● Warranty Card ● Carry Bag CA UT IO N ● Wiping Cloth ! Before your purchase, if any of the above items is damaged or missing, please contact your retailer.
1-2 External Appearance Refer to the diagram below to identify the components on every side of the Notebook. 1. Top View 1 1 2 4 3 5 6 8 CA UT IO N 7 ! 9 Your Notebook keyboard may vary depending on the country/region of purchase.
1 No. Item Description 1 Web Camera Records videos or take photos 2 LCD LED backlight panel 3 Power Button Button for turning the computer's power on/off 4 Status Indicators From left to right: a. HDD ● Blinking blue when data is written to or read from the hard disk drive. b. Wireless LAN ● The indicator glows blue when wireless LAN function is enabled. ● The indicator is off when wireless LAN function is disabled. c. Caps Lock ● Glowing blue when the keyboard is in Caps-lock mode. d.
2. Rear View 1 2 1 No. Item Description 1 Battery Pack Replaceable battery pack that serves as Notebook's power supply 2 SIM Card Slot (Optional) To insert the SIM card into the slot and make sure that the gold pins of SIM card are downward. Warning: Please do not insert or pull out the SIM card when power-on, otherwise the data may lose or the card would be damaged.
3. Bottom View 5 1 4 CA UT IO N 1 ! 2 3 No. Item Description 1 Battery Lock Slide inwards to lock the battery in place. Slide outwards to unlock battery. 2 Battery Pack Replaceable battery pack. Serves as the Notebook's power supply 3 Battery Latch Push outwards to release battery for removal 4 Hard Disk Cover The Hard Disk Cover protects the internal hardware. Open to exchange device 5 Memory Cover The cover is to protect the memory from damage.
4. Left View 1 2 3 4 5 Item Description 1 VGA Port Connects to an external display 2 Power Port Connects to the external power supply 3 Vent Notebook's cooling vent 4 USB Port Connects to USB 2.0 device 5 HDMI Port The HDMI(High-Definition Multimedia Interface) provides an all-digital audio/video interface to transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI audio/video device to the port. 5. Right View 1 2 3 4 5 6 7 No.
1-3 Setting Up Your Computer 1. Installing/Removing the Battery Please install the battery before using the Notebook and connect the external power supply transformer. The Notebook can be powered by the battery or the external transformer. If you are in an office environment, we recommend using the external transformer as much as possible. If you are away from the office and no power socket is available, use the battery instead. 1 Installing the Battery 1.
2 3 1 Removing the Battery 1. Shut down the Notebook. Disconnect all cables and devices. 2. Turn the Notebook over and unlock the battery by pushing the Battery Lock outwards. 3. Push the Battery Latch outwards and hold it in place with your finger. Now use the other hand to pull the battery out. 2 3 1 CA UT IO N ! Do not remove the battery while the Notebook is still running. This may damage the data on the hard disk.
2. Connecting the Power Supply The AC transformer provides external power source to your notebook and charges the battery pack at the same time. The AC transformer also has an auto-switching design that can connect to any 100V AC - 240V AC power outlets. 1. Plug the power cord into the power socket of the AC transformer. 2. Plug the connector of the AC transformer to the DC port of Notebook. 1 3. Plug the other end of the power cord to a live power outlet.
2. Turn on the machine by pressing the Power Button. 1 Power Button 4. Emergency Shutdown When the Notebook cannot be shut down through normal means, please press and hold the Power Button until the Notebook powers off. 1-4 Touchpad Usage 1. Introduction to the Touchpad The touchpad is like a computer mouse. It senses the pressure from the user's finger and generates a voltage that is used to control the cursor's movements and issue commands. The touchpad senses finger movements.
2. Single Tap/ Single Click To select a window function or press a button icon, move your finger across the touchpad to move the cursor to the window or button to select. Now tap the touchpad with your finger to perform the action. This action is equivalent to pressing the left mouse button. You can also press the left touchpad button for the same effect. 3. Double Tap/ Double Click 1 To open a file or document, move your finger across the touchpad to move the cursor to the file you wish to open.
1-5 Special Function Keys The following defines some special function keys on the Notebook.
Notebook Install Windows 7 in Notebook 2 ■ Setting BIOS and Install a new Windows 7 system ■ Install Drivers in Windows 7
Install Windows 7 in Notebook Make sure you have these ready: An USB DVD drive, a Notebook driver CD, Windows 7 Install CD Before you continue : ■ Shut down your computer ■ Connect the USB DVD drive to an USB port of Notebook and connect the power cord to AC power 2-1 Setting BIOS and Install a new Windows 7 system BIOS SETUP UTILITY Boot Boot Device Priority [USB : SONY DVD-ROM D] 1st Boot Device 2nd Boot Device [HDD : PO-WDC WD2500B] Specifies the boot sequence
2 7. The setup will display the hard disk partitions (160GB, in this example) of your system. If there were other systems (such as Linux) installed previously, you need select them and click “Drive options (advanced)” -> “Delete” to delete them. When all partitions are clean, setup will display the biggest size of your hard drive. 8. In this biggest hard disk size screen, you can click “Drive options (advanced)” -> “New” to create partitions as you need.
9. From this step we start to install windows 7 into your hard disk. During the process, your computer will restart several times. 17 2 To ensure that all Windows features work correctly, Windows might create additional partitions for system files. So you will see a 100MB partition reserved by system after you create a partition. Select the 70GB partition and click “Next” to continue.
2 10. When the installation is complete, setup will prepare your computer for the first use. Then you can follow steps to select system settings, create an account, set a password...etc, until the whole process is complete and enter Windows 7 system. 2-2 Install Drivers in Windows 7 1. When the Windows 7 is completely installed, you have to install the necessary drivers before using the Notebook. Take out the Windows 7 Install CD from the USB DVD drive, and put the driver CD inside.
Notebook Recovery of Windows 7 System 3
Recovery of Windows 7 System 3 1. Power on the computer, when the message "Press F3 to Rescue and Recovery" appears on the top of the screen, press "F3" to enter the recovery interface. 2. System prepares for the recovery after pressing "F3" key.
3. Recovery begins after clicking "Start" in the following image. 4. When the following image appears, click "OK" to continue.
5. Recovery is accomplished when the following image appears, click "OK" to finish it. 3 6. Now, click "Restart" to reboot the system.
Notebook Introduction to the Linux System ■ Overview ■ Recovery of Linux system 4
4-1 Overview After turning on the Notebook, when you log in Linux system, the following screen will appear: From left to right is in turn: a. Show Desktop icon c. iBus Input Method icon e. Power icon b. Bluetooth icon(optional) d. Network connection status icon f. Volume icon g. Exit icon h. Time icon 4 The four parts provide various applications to meet the needs of your work, life and entertainment, detailed refer to help page. You can click these icons to go to the corresponding utilities.
4-2 Recovery of Linux system ● From DVD to recover system 1 Boot from DVD Power on the computer, insert the system Installation DVD into the DVD drive, press "F11" to select booting system from the DVD drive. 2 Select the way of Installation When the figure as below shows, select "Install and make recovery partition", the system will be installed and a recovery partition will be made.
4 5 After installing, click "Reboot" to restart the system.
● From hard disk to recover system 1 When you log in, according to the screen suggestion, press any key to enter Grub interface, the figure is shown as below: 2 Select "FoxOS recovery" item and then press "Enter", the warning box is shown below: 4 3 Select "Next", system warns the root partition(hd0, 0) will be formatted.
4 Click "Next" to format partition(hd0,0) and recover system from hard disk. The figure is shown as below: 5 When the process is completed, please reboot the system.
Notebook Appendix ■ ■ Product Specification Notebook FAQ Appendix
Appendix Product Specification CPU ● Intel CULV CPU FSB 800MHz *: The CPU type depends on model you purchase, please refer to the physical product. Chipset ● Intel GS45 + ICH9M Memory ● 1 x DDR3 SDRAM socket ● SODIMM,DDR3 1,066 1GB ● SODIMM,DDR3 1,066 2GB(Optional) LCD ● LED backlight panel, 12” WXGA, resolution 1366 x 768 Storage ● SATA 2.5” HDD 5400rpm 160G ● SATA 2.
● 3 x USB 2.0 port ● HDMI ● 1 x VGA port ● 1 x RJ-45 LAN port ● 1 x Headphone port ● 1 x Microphone In port ● 1 x MS/SD/MMC card reader slot ● 1 x DC-in port ● 1 x Kensington lock port LED Indicator ● Power LED (Power button) ● Caps Lock ● Wireless LAN ● Battery power ● HDD BIOS ● AMI ● Support PnP, ACPI 3.0 O/S ● Support Windows 7, Linux FoxOS Dimension ● 298x215x25.3mm Weight ● 1.
Appendix Notebook FAQ 1. A: Does the HDD shock-proof designed? B: Yes, it does. 2. A: Can I expand the RAM stick? B: It depends on your products specification, if you get one with 1GB, you can expand it up to 4GB. 3. A: Could the VGA share memory be adjusted in BIOS? B: No, it could’t. 4. A: Could Windows Vista be installed properly? B: Not Vista ready. 5. A: How long the battery could be used after complete charge? B: About 2-3 hours normaly, according to Notebook loading. 6.
33 Appendix 13. A: What to do when I forget the BIOS or Linux password? B: Please contact with local sevice center to resolve the problem. 14. A: How to get Windows 7 driver? B: From DVD with your Notebook. 15. A: How to view system configuration in Windows 7? B: Please click “Computer” in desktop or use “CPU-Z” and other system tool softwares. 16. A: The problem is that wireless LAN card does not distribute IP address.
