55” Liquid Crystal Display Television Téléviseur à Écran à Cristaux Liquides TV de Pantalla de Cristal Líquido S_ST551 558_UM_US_V02_H 1506-0E8B000
Regulatory Information ................................................................ 3 Description of Warning Symbols .................................................. 4 Safety Notices ............................................................................. 5 Important Safety Instructions ....................................................... 6 Preface ....................................................................................... 9 Warranty and Service ....................................
English Table of Contents 3. Adjusting On-Screen Display (OSD) Settings .......................... 30 3.1 OSD Setting Menus ......................................................... 31 3.2 Adjusting Picture Settings ................................................ 31 3.3 Adjusting Audio Settings .................................................. 32 3.4 Adjusting Channel Settings .............................................. 33 3.5 Adjusting V-CHIP Settings ...............................................
English Regulatory Information FCC Compliance Statement1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Additional Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
English Description of Warning Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 4 WARNING CAUTION This symbol is used to alert users to pay attention to important descriptions regarding usage, maintenance (repair), and additional important information related to this TV. This symbol is used to alert users to the risk of electric shocks due to dangerous and uninsulated components.
English Safety Notices Installation Safety Notes Location Avoid allowing the TV to get prolonged exposure to sunlight or other strong sources of heat. Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
English Important Safety Instructions 6 1. 2. 3. 4. Read these instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug.
English 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.
English Personal safety 1. To avoid overloading the power supply, never plug too many electrical devices into an outlet, power strip, or extension cable. 2. Dangerous high-voltage electric power components are located inside the TV. To avoid electric shock, do not disassemble the casing. 3. Do not place or drop metals, small objects, or flammable materials into the vent of the TV. 4.
Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD TV). Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology. Please carefully read this manual in its entirety before setting up, using or operating your TV. To ensure the safe and correct installation and operations of the TV, it is important that the safety and operation instructions in this manual are followed.
English Recycling Information We care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, which can be re-decomposed and reintegrated into brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned substance.
English Trademark Notice Hannspree products incorporate High-Definition Multimedia Interface (HDMI™) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. License Notice and Trademark Acknowledgment Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
1 English 1.1 Getting Started Package Contents Make sure the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged.
Introducing the TV You can watch NTSC/ATSC broadcast, cable, or digital television channels, and easily connect a VCR, set-top box, or DVD player to the standard CVBS, S-Video, component, and HDMI input ports (location of these ports depends on model). You can also use the TV as a monitor for your PC by connecting it through the VGA or DVI port.
English 1.3 Control Panel Description Button Function Power button. Press to turn the TV on or off. Power Input source INPUT Press to open the input source list or mark an item on the OSD menu. Menu MENU Press to open the OSD menu. Channel select CH Press to increase the channel number or move upward to the previous item on the OSD menu. Channel select CH Press to decrease the channel number or move downward to the next item on the OSD menu.
English 1.4 Input and Output Jacks Description Connector Power connector Function Connect to the included power cord. AC IN Connect to an antenna or cable TV. VHF / UHF Cable/ Antenna CABLE / ANTENNA 1 Connect to an external device, such as a DVD player, set-top box, or a PC’s DVI/ HDMI port. 2 Connect to an external device, such as a DVD player, a set-top box, or a PC’s DVI/ HDMI port.
English Description USB Connector USB Function Support JPEG and MP3 files. S-Video 1 input S-VIDEO 1 Connect to an external device, such as a VCR, set-top box, or a DVD player. Composite input (video) VIDEO 1 Connect to an external device, such as a VCR, set-top box, or a DVD player.
English 1.5 Remote Control Description Icon Press to turn the TV on or off. Power Input source Function INPUT Press to open the input source list. Use to select a channel directly. Press 0-9 to enter the program numbers (press 1 and 0 for channel 10). Keypad Press this button for entering DTV minor channel. Program entry LAST Last Press to return to the last channel selected. Information INFO Press to display program information.
English Description Icon SLEEP Sleep timer Mute Multichannel television sound DVD MUTE MTS DVD Function Press repeatedly to set the sleep time (Sleep off, 15, 30, 45, 60, 90, or 120 minutes). A Sleep Info appears on the middle of the screen to show the remaining time. Cancel the timer by pressing the button to sleep off mode. Press to eliminate audio. Press it again or press the volume adjust buttons to restore sound.
Icon English Description Function Play Press to start playing. Stop Press to stop playing. Previous Press to skip to the previous section. Rewind Press to go backwards. Fast-forward Press to go forwards. Next Press to skip to the next section.
Inserting the Remote Control Batteries Open the battery compartment cover at the back of the remote control. 2 Insert the batteries paying attention to the polarity markings inside the battery compartment. 3 Close the battery compartment cover. ES S S ES PR 1 PR English 1.
English CAUTION • If the remote control is not used for a long period, remove the batteries and store them properly. • Handle damaged or leaking batteries carefully, and wash hands with soap if they come in contact with leaked chemical fluids. • If your remote control has two batteries, do not mix new and old batteries, or the life of the new batteries will be shortened. Chemical fluids may leak from the old batteries. • Danger of explosion if battery is incorrectly replaced.
2 English 2.1 2.1.1 Setting up your TV Basic Connections Power Connection 1 Connect the power cord to the AC IN input jack on the rear of the TV. 2 Insert the plug at the other end of the power cord into a power outlet. 2.1.2 Connecting an Antenna or Cable TV Connect one end of the VHF/UHF (Antenna) or CATV cable to VHF/UHF jack on the rear of the TV.
Connecting External Devices Connect external devices such as VCRs, set-top box, DVD players, video game consoles, earphones, or a PC to the TV using the appropriate ports on the rear of the TV. 2.2.1 Connecting External Earphones Headphones Speakers (Built-in Amplifiers) Note: • External speakers or headphones are not included with the TV. • The internal TV speakers will not output sound when headphones are plugged in. • Use external speakers with built-in amplifiers only.
English 2.2.
Connecting a VCR/ Set-top box/ DVD Player Using Video Inputs Connect the TV to a VCR/set-top box/ DVD player using the video inputs. Video Cable (Optional) Y PB PR VCR Audio Cable (Optional) STB VIDEO L AUDIO DVD R 1 2 Video Cable (Optional) VCR S-VIDEO 1 STB L DVD AUDIO R 1 Audio Cable (Optional) Video Cable (Optional) VCR STB DVD Audio Cable (Optional) 25 English 2.2.
Connecting a PC using VGA Connect the TV to your PC to use it as the monitor using the VGA port as shown. 1 2 Connect the VGA port of the TV to the VGA output of the PC. Connect the PC LINE IN port of your TV to the line out port of the PC to listen to audio from the PC. VGA AUDIO IN PC VGA Cable (Optional) Audio Cable (Optional) 2.2.5 Connecting a PC using DVI Connect the TV to your PC to use it as the monitor using the DVI port as shown.
Connecting HDMI HDMI (High Definition Multimedia Interface) assures that the best video signal is always sent from source to the TV. Refer to the following illustration to connect an HDMI device to the TV. HDMI IN 1 HDMI 4 2 3 HDMI Cable (Optional) DVD Player Note: When the HDMI cable is connected, connecting the audio cable is not necessary. However, it is necessary to do so if a HDMI to DVI cable is connected. 2.2.7 Connecting USB Connect the USB flash drive to the TV using the USB port as shown.
English 2.3 Using the TV 2.3.1 Turning the TV On and Off 1 Press on the control panel or remote control. The power LED indicator on the TV changes from red to green, indicating that the TV is on. 2 Press again. The power LED changes from green to red, indicating that the TV is off. 2.3.2 Switching Source Signals Press INPUT on the control panel or remote control to select the incoming source signal to set TV source for channel search. Press OK to confirm. 2.3.
English 2.3.5 Adjusting the Volume 1 Press VOL+ on the control panel or volume. 2 Press VOL- on the control panel or the volume. 3 Press MUTE VOL VOL on the remote control to increase the on the remote control to decrease to eliminate sounds, and press MUTE again or press the volume buttons to restore the original volume. 2.3.6 Editing Channel Table or Favorite Channel 1 Press MENU on the control panel or remote control, then select to enter the Channel menu. 2 Select Channel List.
3 English Adjusting On-Screen Display (OSD) Settings The On-Screen Display (OSD) menu system provides a quick and simple method to adjust the TV settings. The OSD menu can be accessed through the buttons either on the control panel or the remote control. Before going to details of each OSD item, you may get acquainted with the placement of the OSD system: CURRENT MENU: ADJUSTABLE ITEMS: Displays the title of the currently chosen menu. Displays the settings/ values of the adjustable items.
OSD Setting Menus Follow the instructions indicated on the bottom of the OSD Function Menu. Press / CH on the control panel or / arrow keys on the remote control to scroll CH through the menus. Press INPUT on the control panel or OK key on the remote control to select an item and then press MENU key to exit the OSD menu. The following menus can be set by different adjustment methods. 3.2 1 2 3 Adjusting Picture Settings Press MENU to enter the OSD Main Menu screen.
English 3.3 1 2 3 Adjusting Audio Settings Press MENU to enter the OSD Main Menu screen. Press / on the remote control or CHS / CHT on the control panel to select Audio menu. Audio Mode Picture Equalizer Audio Balance MTS Channel Auto Volume Recall V-CHIP Setup Press / OK on the remote control or INPUT on the control panel to enter the Audio menu. Move OK Enter Return Return Menu Exit 4 Press an item.
1 2 3 English 3.4 Adjusting Channel Settings Press MENU to enter the OSD Main Menu screen. Press / on the remote control or CHS / CHT on the control panel to select Channel menu. Antenna Picture Scan Mode Audio Auto Scan Channel List Channel V-CHIP Setup Press / OK on the remote control or INPUT on the control panel to enter the Channel menu. Move OK Enter Return Return Menu Exit 4 Press item.
English 3.5 1 2 3 Adjusting V-CHIP Settings Press MENU to enter the OSD Main Menu screen. Press / on the remote control or CHS / CHT on the control panel to select V-CHIP menu. Enter Password Picture Change Password Audio Lock Unrated Block Channel MPAA TV Rating V-CHIP Can. English Can. French Setup Press / OK on the remote control or INPUT on the control panel to enter the VCHIP menu. Move 4 Enter the password to activate the menu of V-CHIP. 5 Press an item.
1 2 3 English 3.6 Adjusting Setup Settings Press MENU to enter the OSD Main Menu screen. Press / on the remote control or CHS / CHT on the control panel to select Setup menu. Press / OK on the remote control or INPUT on the control panel to enter the Setup menu. Setup Wizard Picture OSD Language Audio OSD Time Clock Mode Channel Clock Set Time Zone V-CHIP Sleep Time Vivid Motion Setup CC Mode Next Page Move OK Enter Return Return Menu Exit 4 Press an item.
4 English Troubleshooting Situation Solution • • Connect the power cord properly. Check if the power LED is on or not. • • • • Press on the control panel or remote control. Press INPUT to cycle through connected video sources. Press channel up or channel down to switch to other TV channels. Make sure all cables are connected properly. No picture, or poor picture, sound is OK. • • Check the antenna and cable connections. Adjust the brightness in the OSD menus. Picture is not in color.
Specifications LCD Panel Size 55 inch TFT Screen Format 16:9 Panel Resolution 1920 (H) x 1080 (V) Refresh Rate 120 Hz TV System ATV: NTSC English 5 DTV: ATSC AV (CVBS) x2 S-Video x2 Video System HDMI: HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 HDTV: (YPbPr) x2 PC (VGA) Photo System USB (JPEG) AV/S-Video: (RCA x2) R/L in HDTV: (RCAx2) R/L in HDMI: HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 Audio System USB (MP3) PC Audio in: Phone jack (Black) Audio out: Earphone jack (Green) Built-in Stereo Amplifier Outp
English PC Mode Support Timing Mode Resolution (active dot) Horizontal Frequency (KHz) Vertical Frequency (Hz) Nominal Pixel Clock (MHz) VGA DVI to HDMI VGA 640x480@60Hz 31.469 59.941 25.175 V V SVGA 800x600@60Hz 37.879 60.317 40.000 V V XGA 1024x768@60Hz 48.363 60.004 65.000 V V SXGA 1280x1024@60Hz 63.981 60.020 108.000 V V WXGA+ 1440x900@60Hz 55.935 59.887 106.500 V V WSXGA+ 1680x1050@60Hz 65.290 59.954 146.250 V V VESA 1920x1080@60Hz 67.500 60.
6.1 Appendix: Remote Control Guide English 6 Introduction The electronic equipment type switch buttons are used for switching the current electronic equipment type on the remote control. The remote control includes 4 electronic equipment types: DVD, AUDIO, CABLE and TV. The remote control keypad matrix includes 4 electronic equipment type switch buttons (DVD, AUDIO, CABLE and TV).
English 6. During the setting process, only digit keys ‘0’ through ‘9’ are valid inputs, while other buttons are deemed invalid and do not affect the code setting. For example, inputting “02” then pressing RETURN does affect the “02” already input. 6.1.3 Searching Codes If the desired electronic equipment code for setting can not be found on the list in the appendix, try to use the code-searching function with operating procedures as follows: 1. Press the corresponding electronic equipment button.
English 6.1.4 Setting Volume Lock Operating procedures are as follows: 1. Press the corresponding electronic equipment button. The indicator light will come on for 2 seconds then it goes off; after 3 seconds, the indicator light will come on again, showing that the setting mode has been entered. 2.
English perform this unlock operation, while those electronic equipment modes not so operated still have channel locked up). The indicator light then goes off and setting mode is exited. 4. During the setting process, releasing the electronic equipment button exits the setting mode immediately without changing the status prior to setting. 5. Buttons other than CH+/CH- are not functional during search. Channel buttons include CH+ and CH-. 6.1.
English 6. Default volume lock setting: Electronic equipment VOL+, VOL- and Mute Note TV Transmit TV code Provided by manufacturer CABLE Transmit CABLE code Unlocked AUDIO Transmit AUDIO code Unlocked DVD Transmit DVD code Unlocked 7.
English 6.1.7 Description There is no multi-function code setting operation under TV mode but a fixed code for the TV manufacturer. Therefore, code setting and code-searching functions are disabled under this mode; other functions such as volume lock, channel lock and code display are operable. 6.2 6.2.1 Other Descriptions Double Clicking At any time, only when a single button is pressed, the corresponding code is just output. Two or more buttons simultaneously pressed do not output any code. 6.2.
Component Program Codes Setup Code for VCR’s ABC 2102 Setup Code for VCR’s Setup Code for VCR’s Craig 2005, 2011, 2024, 2015 GoldStar 2005, 2022, 2006, 2023 Curtis Mathes 2913, 2004, 2020 HaoJie 2024 Harman/ Kardon 2016, 2006 Harwood 2015 Hewiett Packard 2102 HI-Q 2011 Hitachi 2005, 2008 Admiral 2012, 2022 Aiko 2025 Aiwa 2005, 2027 Cybernex 2024 2102 CyberPower 2102 Daewoo 2010, 2017, 2025 Dell 2102 Denon 2008 Direc TV 2059 Durabrand 2007, 2006 Howard Computers 2
Setup Code for VCR’s English Magnin Marantz 2024 Setup Code for VCR’s Olympus 2004, 2016 Optimus Marta 2005 Matsushita 2004, 2020 Media Center PC 2102 MEI 2004 Memorex 2004, 2020, 2005, 2012, 2007, 2011, 2024, 2017, 2022, 2027 Setup Code for VCR’s 2004 RCA 2013, 2004, 2024, 2008, 2077 Realistic 2004, 2005, 2012, 2011, 2017 Replay TV 2043 Runco 2007 2087, 2020, 2005, 2012, 2017, 2026 Orion 2021, 2022, 2001, 2027 Panasonic 2087, 2004, 2020, 2043, 2023 Sampo 2005, 2012 Penney 2
Tashiko 2005 Tatung 2010, 2014 Technics 2004, 2020 Teco 2004, 2005 2012, 2006 Teknika 2004, 2005 Tivo 2048, 2044, 2098, 2059 Setup Code for VCR’s XR-1000 Yamaha Setup Code for DVD’s 2004, 2015 2006 Setup Code for DVD’s Go Video 2060, 2073, 2092, 2063, 2089, 2076, 2100 Greenhill 2058 Harman/ Kardon 2041,2057 Aiwa 2049 Hitachi 2040, 2052 Akai 2062 Hiteker 2053 Allegro 2076 Initial 2058 Integra 2046 JBL 2057 JVC 2038, 2045, 2075 Kenwood 2028, 2035 TMK 2024 Apex Digita
Setup Code for DVD’s English Norcent 2078 Onkyo Setup Code for DVD’s Sony 2034, 2074, 2083 2029, 2046, 2064 SVA 2085 Oritron 2051 Sylvania 2054 Panasonic 2028, 2101 Symphonic 2054 Philips 2029, 2036, 2050 Teac 2058 Technics 2028 Pioneer 2033, 2039 2039 Polarold 2090, 2086 Theta Digital Polk Audio 2036 Toshiba 2029, 2055 Portland 2062 V, Inc.
Regal 0016, 0014 Runco 0001 Samsung 0001, 0010 Scientific Atlanta 0059, 0037, 0020, 0003 Sony 0041 Starcom 0002, 0006 Supercable 0015 Supermax Setup Code for Satellite DirecTV 0018, 0023, 0025, 0044, 0013, 0029, 0057, 0028, 0034, 0058, 0060, 0043, 0007, 0051, 0056, 0053, 0052, 0042 Dish Network System 0040, 0031, 0054 Dishpro 0040, 0031, 0054 0038 Setup Code for Satellite Panasonic 0013, 0026 Paysat 0028 Philips 0044, 0029, 0057, 0028, 0060, 0027, 0007, 0053 Proscan 0018, 0023
Setup Code for CD Setup Code for CD Setup Code for CD English Carver 3019, 3022 Panasonic 3004 Yamaha 3006 Dkk 3001 Parasound 3027 Zonda 3019 DMX Electronics 3019 Philips 3030, 3019 Pioneer 3038, 3005 Dynamic Bass 3022 Polk Audio 3019 Fisher 3022 Proton 3019 Garrard 3027 QED 3019 Genexxa 3005 Quad 3004 Harman/ Kardon 3019, 3020 RCA 3038, 3005, 3027, 3022, 3008 Hitachi 3005 Realistic 3027, 3022 Rotel 3019, 3027 SAE 3019 Sansui 3019 Sanyo 3022 SAST 3049 S
Setup Code for Audio Amp / Tuner’s Carver 3042 Teac 3049 Denon 3051, 3040 Technics 3043, 3055 Fonmix 3051 Thorens 3042 Harman/ Kardon 3014 Victor 3010 Wards 3002 Hitachi 3047 Integra 3017 Yamaha 3021, 3048, 3041 JBL 3014 JVC 3010 Kenwood 3050, 3056 KLH 3053 Magnavox 3042, 3046, 3029 Marantz 3042, 3046 Onkyo 3035, 3017 Optimus 3036, 3018, 3002, 3031, 3029 Proscan 3044 Qisheng 3057 RCA 3036, 3057, 3044, 3029, 3039 Silsonic 3021 Sony 3037, 3054, 3045, 3058 Sou
7 S-VIDEO 2 USB Dissembling the stand base: 1 Disconnect all the cables and cords from the TV to prevent breakage. 2 Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV. 3 Remove the six (6) screws so that the stand base can be removed. 4 Gently remove the stand base. 5 Please add rubber cover when this TV is mounted on the wall.
1 Using the Cable Organizer English 8 Route the cables through the cable clamp.
