Specifications

22
English
2.3 Using the TV
2.3.1 Turning the TV On and Off
1 Press on the control panel or remote control. The power LED turns white
when the device is turned on.
2
Press again. The power LED turns off when the device is turned off.
2.3.2 Switching Source Signals
Press INPUT on the control panel or remote control to select the incoming source
signal.
2.3.3 Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1
Press MENU on the control panel or remote control, then select to enter the
TV menu.
2 Select Channels > Channel Scan > ATV only or ATV and DTV .
3 Press on the remote control to run the channel search.
2.3.4 Selecting Channels
•Press PS on the remote control (or P on the control panel) to increase
the channel number.
•Press PT on the remote control (or P on the control panel) to decrease
the channel number.
• Enter the specific channel number by pressing the number buttons on the
remote control.
2.3.5 Adjusting the Volume
1 Press VOL+ on the control panel or remote control to increase the volume.
2 Press VOL- on the control panel or remote control to decrease the volume.
3 Press MUTE to eliminate sounds, and press MUTE again or press the
volume buttons to restore the original volume.