User's Manual
07
2. Wi-Fi hotspot indicator blinks for 2 seconds if the printer Wi-Fi hotspot
password is reset successfully. Reset the printer Wi-Fi hotspot password
only when printer is idle or there is a printer failure. Default password is
12345678.
3. During printing, printing will not be interrupted when the power button is
pressed.
4. During firmware upgrading, upgrading will not be interrupted when the
power button is pressed.
5. When there is a failure, press the power button to power the printer off.
Then, power the printer on again. The printer will try to fix the problem
automatically after powering on.
Power Indicator
Light off Power off
Light on Power on
White light blink Printing/Firmware upgrading
Breath In sleep mode
Note: Sleep mode starts after the printer is idle for 5minutes. Press Power
Button or send a print job to wake the printer up.
Failure Indicator
Light off Printer OK
Orange lightblink
Printer has failed. Follow the APP prompts
to solve problem
Wi-Fi Hotspot Indicator
Light off Function off
Orange light on Function on
Blue light on Connected to one or more devices
Orange light blink Function turning on