User's Manual

Power On and Connect

Connect Power Supply

Plug the power jack into the power socket at the back of

theprinter.

Power On

• Press the power button to power the printer on.

• Power indicator lights on in white, Wi-Fi hotspot indicator starts

blinking in orange in about 10s, then lights on in orange.

• The printer enters the idle status.

Connect Device Wi-Fi

• Open the WLAN connection on your smartphone, tablet,

computer, etc. and select "Liene Photo Printer [xxxx]".

• The default connection password is 12345678.

• When the Wi-Fi hotspot indicator lights on in blue, it means

successful connection for at least 1 device.

Note:

• You can change the password in the APP.

• Support to connect to a maximum of 5 devices simultaneously.

• [xxxx] refers to the last four digits of the product SN number, which

can be found on the label at the bottom of the printer.

• For Android device, after switching the Wi-Fi signal to the printer Wi-Fi

hotspot signal, it will pop up a message that the internet may not be

available.

• Please keep the WLAN connection when using the printer.

• Please download and install the computer driver before connecting to

a computer.