Instructions / Assembly

ManualsBrandsHanover ManualsOutdoorsCameron 11-Piece Aluminum Outdoor Dining Set with 10 Sling Dining Chairs and an Expandable Table

Outdoor Furniture

IMPORTANT

If you have any problems with this product (missing or damaged parts, assembly issues, etc.),

PLEASE DO NOT RETURN TO THE RETAILER/STORE

from where you purchased the product.

Please call our Toll-Free Customer Service Hotline at: 1-866-988-3300

Between 8:00 AM and 5:00 PM Pacific Standard Time, Monday through Friday

To expedite any future warranty claims, please retain the instruction sheet, warranty card

and receipt for future use.

Care and Maintenance

Store furniture in an upright position. Be careful to never allow water to build up in frames as this will

cause corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and

water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a

liquid wax for maximum protection against UV rays and/or salty, damp air. If your set includes cushions,

slings, and/or an umbrella they may be cleaned by hand with a solution of soap and water with a clean

water rinse. (Never machine wash cushions, slings or umbrella covers as this will result in shrinkage or

damage). After cleaning cushions tip on end and allow to drip dry. (Never use a commercial or home dryer

to tumble dry fabric goods). Do not use bleach or solvents to clean any product! This will void the

warranty.

Summary of content (9 pages)

PAGE 1
Outdoor Furniture IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.), PLEASE DO NOT RETURN TO THE RETAILER/STORE from where you purchased the product. Please call our Toll-Free Customer Service Hotline at: 1-866-988-3300 Between 8:00 AM and 5:00 PM Pacific Standard Time, Monday through Friday To expedite any future warranty claims, please retain the instruction sheet, warranty card and receipt for future use.
PAGE 2
FTA01230Q Outdoor Furniture 1-Year Limited Warranty Program For a period of one (1) year after date of purchase, the Manufacturer will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between the Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase.
PAGE 3
Assembly Instructions FTA01230Q Aluminum Extension Table (63” - 94”) Questions, problems, or missing parts? Before returning to the store, call Customer Service. 1-866-988-3300 8 a.m. -5 p.m., PST Monday - Friday Retain this manual for future use.
PAGE 4
FTA01230Q Parts & Tools PART QTY A 1 PICTURE & DESCRIPTION PART QTY C 8 D 8 E 8 F 8 M8*35 Bolt Table Top B 4 Table Leg PICTURE & DESCRIPTION M8 Spring Washer M8 Flat Washer Cap G 1 Hex Wrench WARNING: To avoid damage of your new patio furniture, please use either the carton or another soft surface such as carpet as a working surface to prevent product damage during assembly.
PAGE 5
FTA01230Q Table Assembly Step 1: • • • Place the table top (A) upside down on a soft surface. Line up the bolt holes on the table legs (B) and table top(A). Insert M8*35 (C) bolts through M8 Spring Washer(D) and M8 Flat Washer（E）. Tighten using Hex Wrench (G). Repeat for the other three legs (B). Put on all caps (F). Step 2: • Turn the table right side up on a flat level surface. Ensure all connections are secure before use.
PAGE 6
FTA01230Q Opening Table Step 1: • Open the lock catch counter -clockwise under table top (A) as shown. Step 2: • Push the table top open from both sides. Step 3: • Push the middle of table top to lift it up.
PAGE 7
FTA01230Q Opening Table Step 4: • • Push the middle of table top to right side till it is on supporting tube. Push right and left sides of the table top to middle table top segment. Step 5: • Open the lock catch clockwise under table top (A) as shown.
PAGE 8
FTA01230Q Closing Table Step 1: • Open the lock catch counter-clockwise under table top (A) as shown. Step 2: • Push the table top open from both sides. Step 3: • Push the middle of table top to lift it up.
PAGE 9
FTA01230Q Closing Table Step 4: • • Push the middle table top to lower left corner until it’s on middle supporting tube. Push the right and left table top segments to middle table top segment. Step 5: • Open the lock catch clockwise under table top (A) as shown.