Hanover Outdoor Furniture IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.), PLEASE DO NOT RETURN TO THE RETAILER/STORE from where you purchased the product. Please call our Toll‐Free Customer Service Hotline at: 1‐866-988-3300 Between 9:00 AM and 5:00 PM Eastern Time, Monday through Friday Or visit our website at: www.hanover‐products.
Outdoor Furniture 1-Year Limited Warranty Program For a period of one (1) year after date of purchase, the Manufacturer will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between the Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase.
Assembly Instructions FHTS80021D Gas Fire Table Questions, problems, or missing parts? Before returning to the store, call Customer Service. 1-866-988-3300 8 a.m. - 5 p.m., PST Monday - Friday ContactUs@Hanover-Products.com Retain this manual for future use.
Contents Safety Instructions 3 Parts List 10 Assembly 11 Operation 26 Cleaning & Maintenance 27 Troubleshooting 29 Warranty 31 32 This appliance complies with “ANSI Z21.97-2017/CSA 2.41-2017, Outdoor Decorative Gas Appliances.” IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.
Safety Instructions WARNING For your safety: For outdoor use only (outside, non-enclosed area). Do not use for cooking. WARNING If the information in this manual is not followed property damage, personal injury or loss of life. WHAT TO DO IF YOU SMELL GAS • • • • Do NOT try lighting any appliance. Do NOT touch any electrical switch. Do NOT use any phone in your building. Immediately call your gas supplier from a neighbor’s phone. • Follow the gas supplier’s instructions.
Safety Instructions WARNING FIRE TABLE IS FOR OUTDOOR USE ONLY WARNING Failure to follow the dangers, warning and cautions in this manual may result in serious bodily IMPORTANT NOTICE table. Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. The installation of this unit must adhere to local codes or either the National Fuel Gas Code, ANSI Z223. 1/NFPA54, or CAN/CGA-B149.1, Natural Gas and Propane Installation Code.
Safety Instructions • Only use propane gas for this unit. • Converting this unit to natural gas is dangerous. This conversion kit shall be installed by a codes and requirements of the Authority having jurisdiction. The maximum inlet natural gas any other appliance. • Do not store any combustible materials in the base enclosure. • The use of alcohol, prescription or non-prescription drugs may impair an individual’s ability to combustible materials, such as gasoline.
Safety Instructions • Lava rocks are very hot; please keep children or pets at a safe distance. • Check for leaks after not using the unit for long periods of time. looking through the visual check hole. If the hose is damaged, cracked or cut, it must be • Before each use, remove the lava rocks. Examine the burner and its components. If dirty, clean with a soft brush and soapy water solution. Also examine the area around the burner.
Safety Instructions ANSI Z223.1/NFPA54, or CAN/CGA-B149.1, Natural Gas and Propane Installation Code. • LP gas tank must be arranged for vapour withdrawal. (CGA810) LP gas tank connection. • The LP gas tank must have a tank collar to protect the tank valve. • Never use an LP gas tank with a damaged body, valve, collar, or footing. Dented or rusted LP gas • The LP gas tank should not be dropped or handled roughly. • Tanks must be stored outdoors out of the reach of children.
Safety Instructions b. If the burner valve is open prior to the LP gas cylinder service valve being opened, the a minimal level. d. Be sure that the burner control valve is closed prior to opening the LP gas cylinder mistakenly. service valve and the burner valve, wait 10 seconds to allow the device to reset, open lighting instructions. 2. Be sure to protect the hose from any hot surfaces. Serious danger may result if the hose contacts any hot surface. 3.
Safety Instructions LAVA ROCKS WARNING: 2. If changing or substituting the lava rocks with other media, use lava rocks/pumice stones/glass 3. Pour the lava rocks evenly into the burner area (with the exception of the screen—if applicable). The lava rocks should be 1/2 to 1” (1.2 to 2.5 cm) above the burner. DO NOT PLACE ANY MEDIA ON SCREEN 4. IMPORTANT: Do not exceed a height of 1” (2.5 cm) above the burner when placing lava rocks or other media. Ensure no media covers the igniter screen.
Parts List A Burner Lid - 1 AA B Table Top - 1 BB C Left Side Panel - 1 CC Bolt - 1 D Right Side Panel - 1 DD E Back Panel - 1 EE F Door - 1 G Tank Support - 1 H Lava Rocks - 1 bag I AAA Battery - 1 J Square Burner Bowl - 1 (pre-assembled) K Burner Ring - 1 (pre-assembled) L M Flame Ignitor - 1 (pre-assembled) N Switch Knob - 1 (pre-assembled) O FHTS80021D
Assembly STEP 1 Requires: Place the table top (B) upside down on a soft surface. Line up the bolt holes on the table top (B) with the corresponding bolt holes on right side panel (D). Insert M6x15 bolt and washer (AA) and tighten by hand.
Assembly STEP 2 Requires: Repeat step 1 to assemble the left side panel (C).
Assembly STEP 3 Requires: Line up the bolt holes on the back panel (E) with the corresponding bolt holes on the side panels (C and D). Insert M6x25 bolt and washer (BB) tighten by hand.
Assembly STEP 4 Requires: Line up the bolt holes of the tank holder (G) with the corresponding bolt holes on the side panels (C and D). Insert M6x25 bolt and washer (BB) and tighten by hand.
Assembly STEP 5 Requires: Line up the bolt holes on the door panel (F) with the corresponding bolt holes on the side panels (C and D). Insert bolt (CC) and washer (DD) and tighten using the hex key (EE). Ensure all bolts are securely tightened.
Assembly STEP 6 Requires: (J). Caution: To ensure proper function, the screen on the pilot housing should not be blocked with the lava rocks.
Assembly STEP 7 Requires: A Place the burner lid (A) over the burner bowl. Make sure to remove the burner lid (A) before lighting. Do not place the lid back onto the burner bowl until it has cooled down.
Assembly STEP 8 Requires: Insert the included battery (I) and knob (N) into the electric igniter (M) and twist the button cover on to igniter housing. Do not over tighten.
Assembly STEP 9 valve threads. CAUTION: LP gas tank must be properly disconnected and removed prior to moving this 1. Loosen LP gas tank retainer bolt by turning counter-clockwise. is facing the gas line connection. 3. Secure tank by turning LP gas tank retainer bolt clockwise until tight.
Assembly STEP 10 Requires: O 1. Before connecting, be sure there is no debris caught head of the LP gas tank, head of the regulator valve or in the head of the burner or burner ports. 2. Connect the propane hose assembly to tank by turning knob clockwise until it stops. Repeat step 1 to assemble the left side panel (C).
Assembly STEP 11 Requires: O 1. Before disconnecting make sure the LP gas tank valve is “CLOSED”. 2. Disconnect regulator/hose assembly from LP gas by turning knob counter-clockwise until it is loose. 3. Place the protective cap cover on the LP tank and store the tank outdoors in a well-ventilated area out of direct sunlight.
Assembly following all information provided in the “Important Safeguards” section. Failure to follow those instructions can cause death, serious, injury or property damage. Failure to inspect this connection or not follow these instructions could cause death, serious bodily injury or damage to property. 1. Make sure the regulator hose and valve connections are securely fastened to the burner and the tank. contact 1-877-483-6759 for assistance.
Assembly STEP 12 parts water. 2. Make sure control knob is in the “OFF” position. 3. Connect LP gas tank per “Installing LP Gas Tank” section. 4. Turn LP gas tank valve to “OPEN”. a. If any bubbles appear, turn LP gas tank valve to “CLOSED”, reconnect and re-test. b. If you continue to see bubbles after several attempts, turn LP gas tank valve to “CLOSED” and disconnect LP gas tank, per “Disconnecting LP Gas Tank”. Contact 1-877-483-6759 for assistance. c.
Assembly STEP 13 Requires: F Close the door (F).
Assembly STEP 14 FHTS80021D
Operation WARNING NEVER light the burner with the cover CAUTION PROPER FLAME HEIGHT and ventilation air. CAUTION Check and clean burner/venturi tubes for insects and insect CAUTION Keep outdoor gas appliance area clear and free from combustible materials, gasoline and other LIGHTING 3. Control knob must be in the “OFF” position. 4. To ensure proper function, the screen on the pilot housing should not be covered by lava rocks. 5. Connect LP gas tank per Steps 9 and 10. 6.
Operation LIGHTING (CONTINUED) 11. If igniter does not light burner: the pilot housing. b. Push and turn control knob to “ON”. c. Remove match/lighter once burner is lit. matches illustration on page 24. CAUTION: If ignition does not occur in 5 seconds, turn control knob to “OFF”, wait 5 minutes, fan 1. Turn LP gas tank valve to “CLOSED”. 2. Turn control knob to the “OFF” position. Note: A “poof” sound is normal as the last of the LP gas is burned. 3.
Cleaning & Maintenance 2. For stubborn stains, use a citrus-based cleaner and a nylon scrubbing brush. 3. Rinse clean with water. 4. Allow to air dry. 1. Turn LP gas tank valve to “CLOSED”. 2. Turn control knob to the “OFF” position. Note: A “poof” sound is normal as the last of the gas is burned. 3. Disconnect LP gas tank per “Disconnecting LP Gas Tank” section. 4. Clean all surfaces. 5. Lightly coat the burner with cooking oil to prevent excess rusting.
Troubleshooting LP gas tank valve is closed Make sure regulator is securely attached to the LP gas tank per “Installing LP Gas Tank,” then turn LP gas tank valve to “OPEN” LP gas tank is low or empty 1. Turn LP gas tank valve to “CLOSED” LP gas leak 3.
Troubleshooting Out of gas 1. Turn control knob to “OFF” per “Lighting” section Sudden drop or reduced have been activated prevention device: a. Turn control knob to “OFF” b. Turn LP gas tank valve to “CLOSED” c. Disconnect regulator d. Turn control knob to “ON” f. Turn control knob to “OFF” g.
Warranty Outdoor Furniture IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.), from where you purchased the product. 1-866-988-3300 To expedite any future warranty claims, please retain the instruction sheet, warranty card and receipt for future use. Store furniture in an upright position. Be careful to never allow water to build up in frames as this soap and water. Rinse with clean water and dry with a soft absorbent cloth towel.
Warranty Outdoor Furniture 1-YEAR LIMITED WARRANTY PROGRAM For a period of one (1) year after date of purchase, the Manufacturer will either repair or replace defective original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase. Replacements under this warranty revert back to the date of original purchase for future warranty. warranty applies in normal residential use only and is not intended for commercial use.
