Instructions / Assembly

Table Of Contents

FHTS80021D

Operation

LIGHTING (CONTINUED)

11. If igniter does not light burner:

the pilot housing.

b. Push and turn control knob to “ON”.

c. Remove match/lighter once burner is lit.

matches illustration on page 24.

CAUTION: If ignition does not occur in 5 seconds, turn control knob to “OFF”, wait 5 minutes, fan

1. Turn LP gas tank valve to “CLOSED”.

2. Turn control knob to the “OFF” position. Note: A “poof” sound is normal as the last of the LP

gas is burned.

3. Disconnect LP gas tank per “Disconnecting LP Gas Tank” section.

CAUTION:

supply disconnected.

2. Abrasive cleaners will damage this product.

3. Keep the ventilation opening(s) of the LP gas tank area free and clear of debris.

5. See below for proper cleaning instructions.

6. Check all gas connections for leaks.

7. Check components for any signs of damage or rust.

9. If damage to any component is detected, do NOT operate until repairs are completed.