Instructions / Assembly

FHTS80021D
Safety Instructions
ANSI Z223.1/NFPA54, or CAN/CGA-B149.1, Natural Gas and Propane Installation Code.
• LP gas tank must be arranged for vapour withdrawal.
(CGA810) LP gas tank connection.
• The LP gas tank must have a tank collar to protect the tank valve.
• Never use an LP gas tank with a damaged body, valve, collar, or footing. Dented or rusted LP gas
• The LP gas tank should not be dropped or handled roughly.
• Tanks must be stored outdoors out of the reach of children. Do NOT store in a building, garage,
or any other enclosed area.
• Never store your LP gas tank where temperatures can reach over 125°F (52°C).
• Do not store the LP gas cylinder in direct sunlight or near a source of heat or combustion.
increase, which may open the relief valve and allow gas to escape.
• Place dust cap on valve outlet whenever the LP gas tank is not in use. Only install the
recommended type of dust cap on the LP gas tank and the LP gas tank valve. Other types of
caps or plugs may result in leakage of propane.
a. Do not store a spare LP gas cylinder under or near this appliance.
injury may occur.
• Never attempt to attach this appliance to the self-contained LP gas system of a camper trailer,
motor home or house.
• Always use the pressure regulator and hose assembly provided with the appliance to connect to
a LP gas cylinder. Never connect to an unregulated LP gas supply. For technical support contact
the service center at 1-877-483-6759.
Before connecting, be sure that there is no debris caught in the head of the gas cylinder, head of
HOSE & REGULATOR ASSEMBLY & REPLACEMENT
appliance side connection for a CGA No 791 Cylinder Connection Device. The LP gas hose
manufacturer can be used for replacement.