Instructions / Assembly

ALL the connections. NEVER USE A FLAME TO CHECK FOR GAS LEAKS!
Step5
10. Stick the conversion label on the rating plate as shown in Figure 5.
Metal Rating Plate
1.
2.
3.
4.
5.
6.
7.
Figure 17 Conversion Label
MAINTENANCE
The flames should look like those in Figure 6. To clean the burner,
use a soft brush after the burner has cooled completely. Never
use a vacuum cleaner on the burner. It is recommended to store
the fire pit indoors during winter if it will be subjected to freezing
temperatures. The LP cylinder must be disconnected and
removed from the appliance before the appliance can be stored
indoors.
Figure 6
Serial Number _________________ Model Number: WT17YL3
CAUTION: The gas pressure regulator provided with this appliance must be used. This regulator is set for an outlet pressure of
Minimum clearance from combustible constructions: Sides: 24 in.609 mm. Top 72 in. 1828 mm.
FOR OUTDOOR USE ONLY. If stored indoors, detach and leave cylinder outdoors.
This appliance has been converted to use Natural Gas. Input 30,000 Btu/hr.
Max Gas Supply Pressure 7 inch w.c. (1.74 kPa) Min. Gas Supply Pressure 5 inch w.c. (1.24 kPa)
Fi
g
ure 5
Conversion Label
Page ̐
11