Use and Care Manual

REMOTE CONTROL

A master button is located on the top left hand side of the insert. This button must be

turned ‘On’ to operate remote control. Turn button to ‘Off’ to disable the use of the remote

control.

1.Press the power button once(The digital screen appears the

environmental

Fahrenheit temperature-Thermometer),

4. This fireplace insert consists of a fan forced electric heater

with two heater settings,750 watts or 1,500 watts. Press the

temperature button once(the digital screen appears ‘L’),press the

temperature button a second time(the digital screen appears

‘H’),press the third time,the heater will be turned off,and the

rules is 'L' -'H'-'Off'-and so on. After heater settings( 'L' or 'H' ), it

appears

the available Fahrenheit degrees.

5. This electric fireplace is equipped with a timer ranging from 1

hour to 9 hours. Press the timer button on the remote control to

desired timer(the digital screen appears from ‘1H’ to ‘9H’ when

settings, and so on). After settings, it appears the available

Fahrenheit degrees.

Remote Control Requires Cr025 Batteries Included.

2.Press the button to change the flame brightness, it has 5

classes flame brightness to adjustable from High to Low

( L5-L4-L3-L2-L1).It appears the related flame number on the

digital screen.

3.Press this button to change the flame color, it has 5

different color to adjustable from F1-F2-F3-F4-F5.It appears

the related flame number on the digital screen.