MANTEL MODEL X3437-1CHR X3437-1TEK X3437-1BLK X3437-1GRY X3437-1MAH X3437-1WHT X3437-1WAL 1 REV19-01
PACKAGE CONTENTS A B C D E F G H HARDWARE CONTENTS AA Bolt Qty. 4 BB CC Metal Connector Qty. 4 Screw M4x30 Qty. 4 DD Screw M4x15 Qty. 2 EE SS Screw M4x35 Qty. 12 Safety Chain Qty.
PACKAGE CONTENTS PART DESCRIPTION QTY. A B C D E F G H AA BB CC DD EE SS Top Panel Left Side Panel Right Side Panel Middle Panel Top Shelf Lower Back Panel Base Upper Back Panel Bolt Metal Connector M4x30 screw M4x15 screw M4x35 screw Safety Chain 1 1 1 1 1 1 1 1 4 4 4 2 PART NO. 1 Carefully remove all pieces from the carton and make sure that you have all parts listed (refer to parts list on page 2-3).
PACKAGE STEPS 1. AA X2 AA X2 C B 2.
PACKAGE STEPS 3. D BB X4 4.
PACKAGE STEPS 5. CC X4 CC DD F X2 6.
PACKAGE STEPS H 7. 8.
PACKAGE STEPS IMPORTANT - Safety Chain Installation WARNING: This mantel is heavy furniture. Please be sure to correctly attach the safety chain to both the mantel and an adjacent wall. Failure to do so can cause serious injury or death. INSTALLATION: Assemble the mantel and place it in position Attach one end of the chain to a wall stud using the screw included Attach the other screw – through a link in the chain – to the center of the mantel’s top board (you may need to drill a small starter hole).
