Installation Guide

GFM00752K
5
• Attach the canopy (E) to pre-assembled
frame as shown.
• Insert the fabric hanger (C2) into each
side of the slot at the end of the canopy.
• Attach the ends of the fabric hanger (C2)
to the sliding sleeve (K) using M6 x 15 bolt
& washer (AA).
• Insert ground spikes (DD) into the holes on
the post base plate (I) and into the
ground.
• Tighten all bolts with Allen wrench (EE).
• Ensure that all connections are secure
before use.