Use and Care Manual
Assembly Tools Required
Large Phillips head screwdriver, 10 mm wrench (included), 5 mm (3/16”) Allen wrench (included).
Unbox the Grill
1. Cut and remove the plastic bands from the box.
2. Lift o the top of the box.
3. The sides of the box are individually removable.
4. Open the grill and remove the cooking grid and discard the cardboard.
5. Remove the items in the bottom of the grill and set aside: Stainless Steel Heat Shield, Chimney Top,
Handle, Grate and Stainless Steel Eciency Plate.
6. Unbox cart kit.
7. Unbox shelf kit (optional).
Cart Assembly
8. Remove the bubble wrap from Leg Joiners and the four stainless
steel Cart Legs.
9. Slide the two Leg Joiners into one of the legs that has a locking
castor wheel. Fig.1 The at side of the Joiners should be facing up.
Screw them into place with a Phillips head screw driver.
ASSEMBLY - for Cart Applications
Page 5
10. Select one of the stainless steel legs without the locking caster and
slide it onto the Leg Joiner opposite the rst leg. Screw into place
loosely.
11. The remaining two legs may now be attached without regard to their
position. After the legs are all in, place the cart in an upright position
and securely tighten down the screws. Fig. 2
Fig. 2
Fig.1
Warning:
Do not fully tighten any of the screws until completion. Take care that the screws
are going in straight so the threads are not ruined. Be gentle and do not force the
screws. They should turn with very little pressure.
Fig. 1