size/cm:576L×300W×192/219H size/inch:227L×118W×75.6/86H 9820201 IMPORTANT You must read these instructions carefully before you start to assemble this .Please ensure that you find all parts in the carton box in the correct type and quantity as mentioned in the list illustrated in every page accordingly. Please carry out the steps in the order set out in these instructions. Do not tighten the steps until completing the assembly of all the polycarbonate panels.
Dispose of all plastic bags safely and keep them out of reach of children. assembly Measurement Tools: 1.Tape Measure (16.4Feet) 2.Angle Square 3.Level Meter Installation Tool: 5 hours rinse 1.Triangle Stairs≈ 4.9 Feet Height 2.Spanner 10mm/(25/64) (Ratchet Wrench is better) 3.Spanner 14mm/(35/64) (Install the expansion screw) 4.Hexagon wrench 5mm(13/64)inch 5.Electric screwdriver+5mm (13/64)inch Hexagon wrench (suggest) 6.Wooden Mallet 7.Marking Pen 9.Percussion bit(10mm)(25/64) bit(10mm) 10.
Make sure you choose a correct installation location 300c m/1 h m/ c 576 inc 227 18in c h that e ch 8.If injuries occur, please take immediate action to locate and use a first-aid kit. In case of emergency, please go to the nearest emergency room. 276c m/1 08.7 inch 4 h 20 c n i / 80 m c 204 cm in / 80 219cm / 86inch 206cm / 81inch 192cm / 75.
T4.8(3/16) M6(15/64) 116inch T5(13/64) 112.7inch F4 60 3inch F9 33 M4(5/32) 6-12mm 37 4.7inch F4-2 12 M6(15/64) M6(15/64) 6mm M6(15/64) 113inch M8(5/16) M4(5/32) 113inch 113inch 112.7inch 76.
Schematic diagram of Aluminum frames
Face the white film side towards the sun as they are UV protected
F9 x9 F4 x4 F4-1 x13 Skeleton Assembly Screws Reservation 1 56.1inch / F4-1 F9 ! 56.
F9 x24 Roof Frame Installation 6 F4-1 F9 F9
R1 x2 Long Beam Assembly R1
Connection between long beams and roof skeleton
PC Panels Installation
Frame stators and stoppers installation
F4-2 Eaves,water outlets Installation
F4-2 R3 x2 R3 Insert the eaves into the grooves of the long beams.
Caps of long beams installation
Studdle of columns installation
3.
顶拉装饰盖安装 Cover of roof studdle installation F6 S8 F6 B1 B1 F6 276 cm / m/ 108 .7inc h 204 cm .3 / 80 inch c 204 nch 0.3i F6 8 Cover all F6, tapping it with wooden hammer ensure it will not fall off.
Maintenance: 1.If the ground is not level, the unit may tilt to one side. If you find this is the case, please fix immediately to avoid damage. 2.Please prevent adding any increased weight to the product. 3.Avoid any vine/climbing plants, fruits, or vegetables from growing on the canopy as to not compromise the structure and durability of the product. If the structure is compromised, it can easily cause the frame to crack, break, or collapse. PC Panel Maintenance: 1.
Overall Dimension Figure 1:20 cm 10cm 281cm 10cm 75cm 213cm 213cm 576cm 75cm
Installation Dimension Figure for Feet mm 1:20 2033 2033 2700 2700 2033 2033
Foot Dimension Figure for Fixation 138 100 mm 1:1 t=3mm 3 B1 8 43.6 98 4xØ10.5 B1 19 19 103.6 145.