Use and Care Manual

ManualsBrandsHanover ManualsGarden Center47 in. Aluminum Single Garden Bed Cold Frame Mini-Greenhouse Plant Protector

Table Of Contents

You must read these instructions carefully before you start to assemble it.

Cold Frame

Overall Size/CM: L120 x W51 x H51

Overall Size/inch: L47"x W20"x H20"

9820112

Assembly Instruction

the assembly of the whole product.

quantity as mentioned in the list.

Do not tighten the steps until completing on

IMPORTANT

Please ensure that you find all parts in the correct type and

Please carry out the steps according to the instructions.

Keep the instruction manuals in a safe place for future reference.

Summary of content (10 pages)

PAGE 1
Cold Frame Assembly Instruction Overall Size/CM: L120 x W51 x H51 Overall Size/inch: L47"x W20"x H20" 9820112 IMPORTANT You must read these instructions carefully before you start to assemble it. Please ensure that you find all parts in the correct type and quantity as mentioned in the list. Please carry out the steps according to the instructions. Do not tighten the steps until completing on the assembly of the whole product. Keep the instruction manuals in a safe place for future reference.
PAGE 2
IMPORTANT If you have any problems with this product, please DO NOT RETURN THIS ITEM To the Retailer/Store from where you purchased the product. Please email us anytime with the nature of the problem at: ContactUs@Hanover‐Products.com Please include:  Pictures of the issue(s) and receipt (if available)  Name and address of the Purchaser  Name of retailer Or call our Customer Service team between 9:00 AM and 5:00 PM Eastern Time, Monday through Friday at: 1‐877‐397‐5144 or visit our website at: www.
PAGE 3
BEFORE YOU START Owner's Manual Assembly instructions Instructions are supplied in this manual and contain all appropriate information for your building model. Review all instructions before you begin. During assembly, follow the step sequence carefully for correct results . Parts Check to be sure that you have all the necessary parts for the building. Separate contents of the carton by the part number while reviewing parts list.
PAGE 4
7" 19.05" 17.8" 44.8" 45.1" 19.
PAGE 5
Window Assembly Please note that the parts W2 should installed on the two short edges of the window. Insert the other end of W2 and W3 into corner guard W4. Connect W1 and W2 with F2 screw at each corner.
PAGE 6
Frame Assembly Insert corner posts 3# and 4# into each corner guard S1 and fix them with 1 piece F2 screw. Insert part 1# & 2# into the groove of corner seat S1. Wall panel Assembly Insert wall panels into the groove of part 3# and 4# according to the figure.
PAGE 7
Window and Cover Assembly Push the parts 5# and 2# into the groove of S2L/R. Insert the hump on the part S3R and S3L into the circled groove of W1. Push the parts 2# and 5# into the groove of S3R/L. Window and Cover Installation Insert the parts 3# into the part S3L and S3R, and the parts 4# into the part S2L/R. Install the cover and window combination kit onto the assembled frame.
PAGE 8
Fix each part S2L/R and S3L/R with 1 F2 screw. 8 Buckle W7 up to part W7.
PAGE 9
Maintenance: 1.Please prevent adding any increased weight to the product. PC Panel Maintenance: 1. Be careful not to have a sharp object touch the film as it may scratch. 2.Clean films regularly to keep the light transmittance as clear as possible. 3.The boards/panels have flame retardant polycarbonate material applied to them and is recommended to keep away from fire to avoid softening or deformation. Frame Maintenance: 1.The frames are made of aluminum alloy structure.
PAGE 10
Outdoor Products 1‐Year Limited Warranty Program For a period of one (1) year after purchase, Hanover (“Manufacturer”) will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase. Replacements under this warranty revert back to the date of original purchase for future warranty.