Assembly & Care Guide For Standing Desk Models: HSD0401 & HSD0402
Standing Desk Assembly Instructions The model number of your desk is printed on the side of your carton. Always use this number to identify your desk. Thank you for your purchase of this quality office furniture. With proper use and care, your standing desk will provide you with years of use. Please follow the instructions on how to assemble and disassemble your standing desk. If you should have any problems with your standing desk DO NOT return it to the place of purchase.
Safety Information Keep hands away from height adjustable desk struts to avoid pinching fingers. Do not sit or stand on the desk frame. Do not crawl or lie under the top display surface. The desk height is adjustable so that it can be positioned at the most ergonomically suitable height. Any other use is at user’s risk. WARNING: DO NOT place your hands near the strut. The strut’s angle will change during the lifting stage and may result in pinching.
Parts List Tools Required: Phillips Head Screwdriver (not included) Parts & Hardware Included: 4
Assembly Instructions NOTE: Lay out all components and hardware on a clean surface to ensure you have all the components and hardware listed on the parts page. Using Your Desk 1. Use the squeeze handles located under the top display surface to raise or lower your desk. 2. Once the top display surface is at the desired height release the squeeze handles.
Hanover Office Furniture 2-Year Limited Warranty Program For a period of two (2) years after purchase, Hanover Products (“Manufacturer”) will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase.