Owner's Manual
Table Of Contents
Assembly
Positioning the table
□ Turn the table over and set it down on its legs.
The table is now ready for use.
3
□
Place the table legs (C) on a soft, flat non-
abrasive surface.
Place the table top (A) on a soft, flat non-abrasive
surface.
1
□
Attach the support ring (B) to the table legs (C) using
washers (BB) and hex bolts (AA). Do not fully
tighten the bolts.
□
Ensure all the bolts are aligned and assembled
correctly. Tighten all the bolts with the wrench
(DD). Attach all the hex bolt caps (CC).
□
C
CC
AA
AA
BB
BB
C
B
C
□
Attach the table legs (C) to the table top (A) using
washers (BB) and hex bolts (AA).
□
2
CC
B
B
Attaching the support ring
Attaching the table legs
Page 6 of 6