Use and Care Manual

4. To shut down the fire pit, turn the control knob to the “OFF” position and turn off the

tank valve.

BATTERIES

Make sure the control knob is in the "OFF" position. Unscrew

the push button cap on the ignition module located on the

control panel to access the battery compartment. The ignition

module requires one Alkaline AAA size battery (1.5V). The

negative (-) end goes in first. See Figure 13 Dispose of battery

safely. May explode or leak if charged or disposed of in fire.

Make sure of the polarity. Mercury and cadmium free.

MAINTENANCE

The flames should look like those in Figure 14. To

clean the burner, use a soft brush after the burner has

cooled completely. Never use a vacuum cleaner on

the burner. It is recommended that the fire pit is stored

indoors during the winter if it will be subjected to

freezing temperatures. The LP cylinder must be

disconnected and removed from the appliance before

the appliance can be stored indoors.

Figure 14

Figure 13