Use and Care Manual

14
TROUBLESHOOTING GUIDE
PROBLEM CAUSE REMEDY
Burner won’t light No Propane Gas at Burner
Check that gas tank valve is
open. Turn control knob to “ON”
and push control knob in. Make
sure tank has propane gas.
No Spark at Electrode
Check that AAA battery is
installed with negative (-) end first
and has a charge. Check that the
wire is connected to the ignition
module. Check that the electrode
is not cracked or broken.
Thermocouple Not in Flame
Check that the tip of the
thermocouple is even with the top
of the ignition well.
Remove any fire ice from the
ignition well.
Thermocouple Connection
at the Main Control Valve is
Loose
Tighten the thermocouple nut at
the back of the valve.
Burner won’t stay
lit after lighting
No Fire Ice on Burner
Cover the burner with fire ice per
the instructions