Instructions / Assembly

Page 3 of 6
Exclusions
Failure caused by unreasonable or abusive use, fire, freight damage, acts of nature (such as, but not
limited to freezing or high winds), suntan oil or other chemicals, normal fading, scratching or chipping of
the finish, fading, weathering or staining or discoloration of furniture, accidental damage, repair, or
modifications by customer, glass breakage, normal wear and tear are excluded from the warranty.
Furniture used in commercial, contract or any other non-residential applications; clearance items, display
models, and all other as is purchased items are not covered under this warranty. In addition, BJI, Inc. will
not be responsible for loss of use or time, inconvenience, travel, packaging, or any other
consequential/incidental damages. In no event shall BJI, Inc.’s responsibility exceed the value of the
replacement part/product.
Care and Maintenance
Be careful to never allow water to build up in frames as this will cause corrosion and freeze damage in
cold climates. Wash all frames with a solution of mild soap and water. Rinse with clean water and dry with
a soft absorbent cloth towel. Frames can be treated with a liquid wax for maximum protection against UV
rays and/or salty damp air. If your set includes cushions, slings, and/or an umbrella they may be cleaned
by hand with a solution of soap and water with a clean water rinse. (Never machine wash cushions, slings
or umbrella covers as this will result in shrinkage or damage).
After cleaning cushions, tip on end and allow to drip dry. (Never use a commercial or home dryer to
tumble dry fabric goods).
Do not use bleach or solvents to clean any product! This will void the warranty.
Lack of original receipt will void warranty!
CAUTION: Read all the instruction before assembly.
Failure to do so may result in faulty assembly and potential injury!
Assemble the item on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the
item. Seek assistance to assemble bulky or heavy items.
After final alignment, make sure all bolts, nuts and nut covers are securely tightened.