User's Manual

9
Install the diverter handle. Tighten the set screw with a 4
mm Allen wrench.
Place a black rubber washer in one end of the handshower
hose. Screw this end of the hose to the handshower outlet
port.
Place the screen washer in the other end of the hose.
Screw this end of the hose to the handshower.
Place the handshower in the holder.
Adjust the Slider
You can make the slider easier or harder to move. Use
a 2.5 mm Allen wrench to turn the set screw clockwise
to increase the tension, counter-clockwise to decrease
the tension.