User's Manual

D101583 0207 BL ident4
 Devices for mounting in housings or cabinets, desktop or
portable units, are only to be operated and controlled with the
housing closed.
 Measures are to be taken to ensure the correct restarting of a
program following interruption due to a voltage drop or failure.
Dangerous operating conditions, even short term, should not
occur as a result. If required an emergency stop should be
carried out.
 External measures are to be implemented at those locations
where faults in the automation installation could lead to injury to
persons or damage to property. These measures must
guarantee safe operating conditions even in the event of a fault
or malfunction (e.g. by means of independent limit switches or
mechanical locking devices etc.).
 The electrical installation must be carried out in accordance with
the relevant regulations (e.g. in respect of the cable cross
sections,
fuses and protective earth connections).
 All work involving transport, installation, commissioning and
maintenance is to be carried out exclusively by qualified
personnel (in accordance with IEC 60 364 i.e. HD 384 or
DIN VDE 0100 and national accident prevention regulations).
 USA Radio Frequency Interference FCC Part 15 Notice:
Changes or modifications not expressly approved by TURCK
could void the user's authority to operate the equipment