Assembly Instruction (Mixer)

3
Installation Considerations
For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly before beginning installation. Make sure
that you have all tools and supplies needed to complete the installation.
A countertop having a thickness of 3/4" or less should be reinforced to distribute the
weight of the pot filler.
Do not use plumbers putty. Seal the underside of the escutcheon with silicone sealant if
desired.
•
•
•
•
Technical Information
Recommended water pressure 14.7 - 72.5 psi
Hole size in mounting surface 1-1/8"-- 1 3/8"
Max. mounting surface depth 2 3/4"
Flow rate 2.2 gpm
Requires 1/2 NPSM connection hose (not included)
This faucet is intended for cold water only.
Allow sufficient space for the
escutcheon. There should be a minimum 1
1/2" between the center line of the mounting
hole and the wall or backsplash.
•