Installation Sheet

2
English
Tools Required / Outiles Utiles /
Herramientas Útiles
Technical Information
Flow rate 2.0 GPM
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• To prevent scald injury, the maximum output
temperature of the shower mixing valve (not
included) must be no higher than 120°F. In
Massachusetts, the maximum output temperature
can be no higher than 112° F.
• This showerhead is for use with automatic
compensating valves rated at 1.6 GPM (6.2 L/
min) or less.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required should it
be necessary to request warranty parts.
4"
4¼"
½
2⅜"
2
6
°
2
6
°
This unit meets or exceeds the
following:
• ASME A112.18.1
• CSA B125.1
• WaterSense certified
• Listed by CSA for use in the
US and Canada
17 mm